Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
M.2 2280 internal SSD with black heatsink, 2TB capacity

XPG

XPG GAMMIX S60 Blade AGAMMIXS60-2T-CS internal SSD

SKU CH-CP6E-29NA8 MPN AGAMMIXS60-2T-CS

M.2 2280 2TB drive with PCIe Gen4 x4 interface and NVMe 1.4 protocol, delivering up to 5000 MB/s read and 4200 MB/s write on PC or 4600 MB/s read on PS5

  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity2TB
  • Memory Components3D NAND
  • InterfacePCIe Gen4 x4
  • ProtocolNVMe 1.4

Options 2TB

  • Fast PS5 load times with read speeds up to 4,600MB/s
  • High PC throughput reaching 5,000MB/s sequential read
  • Large 2TB capacity stores extensive game libraries
  • Reliable operation backed by 1,500,000 hours MTBF
  • Durable design withstands 1500G shock resistance

2TB NVMe drive for consumers

The XPG GAMMIX S60 Blade is an M.2 2280 internal SSD built with 3D NAND for consumer workloads. It connects through a PCIe Gen4 x4 interface and follows the NVMe 1.4 protocol. The 2TB capacity targets gaming PCs, laptops and the PS5 console.

Sustained load behaviour

Sequential reads reach up to 5,000 MBps on PC and 4,600 MBps on PS5, while writes peak at 4,200 MBps. SLC caching and a host memory buffer absorb burst traffic before the native 3D NAND settles into steady-state throughput. An MTBF of 1,500,000 hours and 1500G shock resistance indicate durability during prolonged use.

PCIe Gen4 x4 practical limits

The four-lane Gen4 link caps real-world bandwidth near the quoted sequential ceilings, so heavier queues or mixed workloads will not exceed those figures. Operating temperature is rated 0°C to 70°C, with storage tolerance from -40°C to 85°C. Advanced LDPC ECC corrects errors that appear as the NAND ages within these thermal bounds.

Prednosti

  • Fast PS5 load times with read speeds up to 4,600MB/s
  • High PC throughput reaching 5,000MB/s sequential read
  • Large 2TB capacity stores extensive game libraries
  • Reliable operation backed by 1,500,000 hours MTBF
  • Durable design withstands 1500G shock resistance

Špecifikácie

BrandXPG
SeriesGAMMIX S60 Blade
Used ForConsumer
Form FactorM.2 2280
Capacity2TB
Memory Components3D NAND
InterfacePCIe Gen4 x4
ProtocolNVMe 1.4
Max Sequential ReadRead speed up to 4,600MB/s (PS5)
Max Sequential WriteUp to 4200 MBps
MTBF1,500,000 hours
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Max Shock Resistance1500G
Prepravná hmotnosť0.02 kg
Rozmery balenia128 × 102 × 16 mm

Ďalšie verzie tohto modelu

Ďalších 1 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does the 2 TB GAMMIX S60 Blade run hot inside a PS5 during long sessions?

It operates between 0 °C and 70 °C and the PS5 read speed is rated at 4,600 MB/s, so sustained use stays within the specified thermal envelope.

What motherboard slot is required for the M.2 2280 PCIe Gen4 x4 interface?

An M.2 2280 key-M slot wired for PCIe 4.0 x4 and NVMe 1.4 support is needed for full performance.

Will the drive work with a PCIe 3.0 motherboard I already own?

Yes, the NVMe 1.4 controller is backward compatible and will run at PCIe 3.0 speeds on older platforms.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.