Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
ZOTAC Trinity OC RTX 3070 Ti graphics card with triple fans and metal backplate

ZOTAC

ZOTAC ZT-A30710J-10P Trinity OC GeForce RTX 3070 Ti graphics card

SKU CH-6VM6-JA807 MPN ZT-A30710J-10P

Refurbished GeForce RTX 3070 Ti graphics card with 6144 CUDA cores, 8GB GDDR6X memory at 19 Gbps, 1800 MHz boost clock and triple-fan IceStorm 2.0 cooling

  • InterfacePCI Express 4.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 30 Series
  • GPUGeForce RTX 3070 Ti
  • ArchitectureAmpere
  • Boost Clock1800 MHz
  • Factory-overclocked boost to 1800 MHz for higher frame rates
  • 6144 CUDA cores accelerate compute and rendering workloads
  • 8 GB GDDR6X at 19 Gbps on a 256-bit bus feeds data fast
  • IceStorm 2.0 triple-fan cooling with FREEZE fan stop keeps thermals low
  • HDMI 2.1 plus three DisplayPort 1.4a drive four displays up to 7680 x 4320

ZOTAC Trinity OC RTX 3070 Ti 8GB

The ZOTAC Trinity OC GeForce RTX 3070 Ti is a refurbished graphics card built on the NVIDIA Ampere architecture. It delivers 6144 CUDA cores with a boost clock of 1800 MHz. The 8GB GDDR6X memory runs at 19 Gbps across a 256-bit interface. It connects via PCI Express 4.0 and supports DirectX 12 Ultimate and OpenGL 4.6 for modern gaming and creative workloads.

Ideal for 1440p gaming and multi-monitor setups

This card suits builders targeting high-refresh 1440p gaming or content creation across up to four displays using one HDMI 2.1 and three DisplayPort 1.4a outputs. The 318 mm length and triple-fan IceStorm 2.0 cooler require a spacious case and good airflow. Systems limited to a 750W power supply or cases shorter than 318 mm should look at a smaller or lower-power model.

310W TDP and dual 8-pin power requirement

The thermal design power is rated at 310W with a recommended 750W PSU and two 8-pin power connectors. This single specification determines whether your power supply and case cooling can support the card. Verify both before purchase.

Põhijooned

  • Factory-overclocked boost to 1800 MHz for higher frame rates
  • 6144 CUDA cores accelerate compute and rendering workloads
  • 8 GB GDDR6X at 19 Gbps on a 256-bit bus feeds data fast
  • IceStorm 2.0 triple-fan cooling with FREEZE fan stop keeps thermals low
  • HDMI 2.1 plus three DisplayPort 1.4a drive four displays up to 7680 x 4320

Tehnilised andmed

BrandZOTAC
SeriesTrinity OC
ModelZT-A30710J-10P
InterfacePCI Express 4.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 30 Series
GPUGeForce RTX 3070 Ti
ArchitectureAmpere
Boost Clock1800 MHz
CUDA Cores6144
Effective Memory Clock19 Gbps
Memory Size8GB
Memory Interface256-Bit
Memory TypeGDDR6X
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI1 x HDMI 2.1
DisplayPort3 x DisplayPort 1.4a
Max Resolution7680 x 4320
SLI SupportNo
Virtual Reality ReadyYes
CoolerTriple Fans
Operating Systems SupportedWindows 10 64-bit (build 2004 or later) ‍👉Check gaming pc with Windows 11 Pro
Thermal Design Power310W
Recommended PSU Wattage750W
Power Connector2 x 8-Pin
HDCP Ready2.3
Features2nd Gen Ray Tracing Cores
3rd Gen Tensor Cores
SPECTRA 2.0 RGB Lighting
IceStorm 2.0 Advanced Cooling
Active Fan Control with FREEZE Fan Stop
Metal RGB LED Backplate
FireStorm Utility
VR Ready
Max GPU Length318 mm
Card Dimensions (L x H)12.50" x 4.60"
Slot Width2.5 Slot
Tarnekaal2.09 kg
Pakendi mõõtmed424 × 292 × 99 mm

Küsimused selle toote kohta

What slot length and power connectors does the ZOTAC ZT-A30710J-10P require to fit and mount?

The card uses a PCI Express 4.0 interface and draws power through two 8-pin connectors; a 750 W supply is recommended.

How is the Trinity OC installed, and which step do builders often miss?

Insert the 318 mm card into the top PCIe slot, secure the bracket screws, then attach both 8-pin power cables — missing the second connector is the frequent oversight.

What maintenance or replacement will the IceStorm 2.0 cooler need later?

The triple-fan cooler with FREEZE Fan Stop should be dusted periodically; if a fan bearing wears out, the entire fan assembly can be swapped without removing the heatsink.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.