ZOTAC
ZOTAC ZT-A30710J-10P Trinity OC GeForce RTX 3070 Ti graphics card
Refurbished GeForce RTX 3070 Ti graphics card with 6144 CUDA cores, 8GB GDDR6X memory at 19 Gbps, 1800 MHz boost clock and triple-fan IceStorm 2.0 cooling
- InterfacePCI Express 4.0
- Chipset ManufacturerNVIDIA
- GPU SeriesNVIDIA GeForce RTX 30 Series
- GPUGeForce RTX 3070 Ti
- ArchitectureAmpere
- Boost Clock1800 MHz
- Factory-overclocked boost to 1800 MHz for higher frame rates
- 6144 CUDA cores accelerate compute and rendering workloads
- 8 GB GDDR6X at 19 Gbps on a 256-bit bus feeds data fast
- IceStorm 2.0 triple-fan cooling with FREEZE fan stop keeps thermals low
- HDMI 2.1 plus three DisplayPort 1.4a drive four displays up to 7680 x 4320
ZOTAC Trinity OC RTX 3070 Ti 8GB
The ZOTAC Trinity OC GeForce RTX 3070 Ti is a refurbished graphics card built on the NVIDIA Ampere architecture. It delivers 6144 CUDA cores with a boost clock of 1800 MHz. The 8GB GDDR6X memory runs at 19 Gbps across a 256-bit interface. It connects via PCI Express 4.0 and supports DirectX 12 Ultimate and OpenGL 4.6 for modern gaming and creative workloads.
Ideal for 1440p gaming and multi-monitor setups
This card suits builders targeting high-refresh 1440p gaming or content creation across up to four displays using one HDMI 2.1 and three DisplayPort 1.4a outputs. The 318 mm length and triple-fan IceStorm 2.0 cooler require a spacious case and good airflow. Systems limited to a 750W power supply or cases shorter than 318 mm should look at a smaller or lower-power model.
310W TDP and dual 8-pin power requirement
The thermal design power is rated at 310W with a recommended 750W PSU and two 8-pin power connectors. This single specification determines whether your power supply and case cooling can support the card. Verify both before purchase.
Points forts
- Factory-overclocked boost to 1800 MHz for higher frame rates
- 6144 CUDA cores accelerate compute and rendering workloads
- 8 GB GDDR6X at 19 Gbps on a 256-bit bus feeds data fast
- IceStorm 2.0 triple-fan cooling with FREEZE fan stop keeps thermals low
- HDMI 2.1 plus three DisplayPort 1.4a drive four displays up to 7680 x 4320
Caractéristiques
| Brand | ZOTAC |
|---|---|
| Series | Trinity OC |
| Model | ZT-A30710J-10P |
| Interface | PCI Express 4.0 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3070 Ti |
| Architecture | Ampere |
| Boost Clock | 1800 MHz |
| CUDA Cores | 6144 |
| Effective Memory Clock | 19 Gbps |
| Memory Size | 8GB |
| Memory Interface | 256-Bit |
| Memory Type | GDDR6X |
| DirectX | DirectX 12 Ultimate |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 1 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| Operating Systems Supported | Windows 10 64-bit (build 2004 or later) 👉Check gaming pc with Windows 11 Pro |
| Thermal Design Power | 310W |
| Recommended PSU Wattage | 750W |
| Power Connector | 2 x 8-Pin |
| HDCP Ready | 2.3 |
| Features | 2nd Gen Ray Tracing Cores 3rd Gen Tensor Cores SPECTRA 2.0 RGB Lighting IceStorm 2.0 Advanced Cooling Active Fan Control with FREEZE Fan Stop Metal RGB LED Backplate FireStorm Utility VR Ready |
| Max GPU Length | 318 mm |
| Card Dimensions (L x H) | 12.50" x 4.60" |
| Slot Width | 2.5 Slot |
| Poids d’expédition | 2.09 kg |
| Dimensions du colis | 424 × 292 × 99 mm |
Questions sur cet article
What slot length and power connectors does the ZOTAC ZT-A30710J-10P require to fit and mount?
The card uses a PCI Express 4.0 interface and draws power through two 8-pin connectors; a 750 W supply is recommended.
How is the Trinity OC installed, and which step do builders often miss?
Insert the 318 mm card into the top PCIe slot, secure the bracket screws, then attach both 8-pin power cables — missing the second connector is the frequent oversight.
What maintenance or replacement will the IceStorm 2.0 cooler need later?
The triple-fan cooler with FREEZE Fan Stop should be dusted periodically; if a fan bearing wears out, the entire fan assembly can be swapped without removing the heatsink.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



