A-Tech 16GB (2x8GB) DDR3 1866 ECC RDIMM 2Rx4 1.5V server RAM
- 16GB (2 x 8GB)
- DDR3 1866 (PC3 1490…
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
A-Tech
16 GB dual-channel DDR3 1866 ECC RDIMM kit with CL13 latency and 1.5 V operation for registered server memory slots
Capacity 16GB (2 x 8GB)
This 16 GB kit contains two 8 GB registered ECC DIMMs built for servers and workstations that require DDR3 1866 memory. The modules use a 2Rx8 dual-rank layout and operate at the standard 1.5 V DDR3 voltage. Only systems that support registered DDR3 DIMMs can use this memory.
The registered design places a register between the memory controller and the DRAM chips, reducing electrical load on the bus during continuous operation. This helps maintain signal integrity when all slots are populated under heavy multi-threaded workloads. ECC circuitry corrects single-bit errors on the fly without halting the system. CL13 latency at 1866 MHz provides predictable timing for long-running tasks.
The decisive specification is the 240-pin registered ECC DIMM form factor combined with DDR3 1866 speed. Desktop and laptop platforms cannot accept registered modules, so this kit will not fit consumer motherboards. Verify that your server or workstation manual lists DDR3 RDIMM support before ordering.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 8GB 2Rx8 PC3-14900R |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR3 1866 (PC3 14900) |
| CAS Latency | CL13 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Each module is rated at 1.5V standard DDR3 voltage; actual power draw depends on the server's memory controller and workload, not on the kit alone.
The motherboard must accept DDR3 registered ECC RDIMMs in a 240-pin slot and be a server or workstation platform; desktop or laptop boards will not work.
Mixing ranks is possible if the motherboard supports it, but the memory controller will typically run all populated channels at the lowest common speed and voltage.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?