Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green circuit board with black memory chips, no heat spreader, 240-pin DIMM edge connector

A-Tech

A-Tech 4GB DDR3 1600MHz CL11 1.5V DIMM Desktop RAM

SKU CH-N6J2-G1ZKH

A 4 GB DDR3 DIMM running at 1600 MHz with CL11 latency and 1.5 V operation for desktop upgrades

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCNo
  • Boosts multitasking with 4 GB DDR3 capacity
  • 1600 MHz speed keeps data flowing smoothly
  • CL11 latency delivers responsive desktop performance
  • 5 V standard voltage ensures broad motherboard compatibility
  • 240-pin DIMM fits standard desktop memory slots

4GB DDR3 1600MHz Desktop Module

This 4GB DDR3 DIMM runs at 1600MHz with CL11 latency and 1.5V operation. It is an unbuffered, non-ECC module built for standard desktop memory slots. The 240-pin form factor fits typical DDR3 motherboards. It serves as a direct replacement for several G.Skill part numbers.

Tested Replacement Compatibility

The module is validated as a compatible equivalent for G.Skill F3-1600C9D-8GAB, F3-1600C9D-8GAO, F3-12800CL7Q-16GBZM, F3-12800CL8D-8GBXM and F3-12800CL9D-8GBRL kits. Buyers can match the listed part numbers to confirm fit before ordering. No extra software or accessories are included with the memory stick.

Standard Voltage Unbuffered Build

The stick uses major-brand chips on a green PCB without a heat spreader. It operates at the standard 1.50V DDR3 voltage and uses a 240-pin DIMM edge connector. The unbuffered design suits consumer desktop boards that accept non-ECC UDIMM memory. Lifetime warranty and US-based tech support back the product.

Istaknuto

  • Boosts multitasking with 4 GB DDR3 capacity
  • 1600 MHz speed keeps data flowing smoothly
  • CL11 latency delivers responsive desktop performance
  • 5 V standard voltage ensures broad motherboard compatibility
  • 240-pin DIMM fits standard desktop memory slots

Specifikacije

BrandA-Tech
SeriesCompatible Replacement for G.Skill
ModelF3-1600C9D-8GAB, F3-1600C9D-8GAO, F3-12800CL7Q-16GBZM, F3-12800CL8D-8GBXM, F3-12800CL9D-8GBRL
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesF3-1600C9D-8GAB, F3-1600C9D-8GAO, F3-12800CL7Q-16GBZM, F3-12800CL8D-8GBXM, F3-12800CL9D-8GBRL
Recommend UseCompatible Replacement for G.Skill F3-1600C9D-8GAB, F3-1600C9D-8GAO, F3-12800CL7Q-16GBZM, F3-12800CL8D-8GBXM, F3-12800CL9D-8GBRL

Pitanja o ovom artiklu

Will the 4GB DDR3 1600MHz CL11 module need a heat spreader added later for sustained loads?

The module ships without a heat spreader; DDR3 at 1.5 V and CL11 typically runs cool enough that extra cooling is rarely required.

What limit appears first when the DIMM runs at 1600 MHz continuously?

The CL11 latency at 1.5 V is the primary timing constraint; bandwidth caps at PC3-12800 before thermal or voltage limits become an issue.

How much noise, heat or power does the 240-pin DDR3 stick produce during all-day operation?

Unbuffered DDR3 at 1.5 V draws modest power, generates low heat and has no moving parts, so it adds no audible noise to the system.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.