Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 4GB DDR3 1866 CL13 desktop RAM

SKU CH-CM08-62EM0

4GB DDR3 desktop DIMM running at 1866MHz with CL13 latency and 1.5V operation

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • Tested Frequency1866
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCNo
  • 4GB capacity adds responsive multitasking headroom for everyday desktop workloads
  • DDR3 1866 speed moves data quickly through the memory bus
  • CL13 latency keeps timing tight for smoother application performance
  • 5V standard voltage ensures broad motherboard compatibility without extra configuration
  • 240-pin DIMM form factor fits standard desktop memory slots directly

4GB DDR3 1866 desktop module

This A-Tech module adds four gigabytes of DDR3 memory to a desktop system. It is built as a direct replacement for several G.Skill F3-14900 series kits. The single stick fits a standard 240-pin DIMM slot and runs at the standard 1.5 volt level.

CAS latency 13 at rated speed

The module operates at 1866 MHz with a CAS latency of 13 cycles. This timing figure determines whether the stick matches the memory controller requirements of the target motherboard. Verify that the platform supports CL13 at this frequency before installation.

Steady throughput without heat spreader

Without a heat spreader the module relies on case airflow to dissipate heat during extended workloads. Sustained bandwidth remains consistent as long as the chassis provides adequate ventilation across the bare circuit board.

Istaknuto

  • 4GB capacity adds responsive multitasking headroom for everyday desktop workloads
  • DDR3 1866 speed moves data quickly through the memory bus
  • CL13 latency keeps timing tight for smoother application performance
  • 5V standard voltage ensures broad motherboard compatibility without extra configuration
  • 240-pin DIMM form factor fits standard desktop memory slots directly

Specifikacije

BrandA-Tech
SeriesCompatible Replacement for G.Skill
ModelF3-14900CL9D-8GBSR, F3-14900CL9D-8GBXL, F3-14900CL9Q-16GBXL, F3-14900CL9Q-16GBZL, F3-14900CL9S-4GBXL
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
Tested Frequency1866
CAS LatencyCL13
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesF3-14900CL9D-8GBSR, F3-14900CL9D-8GBXL, F3-14900CL9Q-16GBXL, F3-14900CL9Q-16GBZL, F3-14900CL9S-4GBXL
Recommend UseCompatible Replacement for G.Skill F3-14900CL9D-8GBSR, F3-14900CL9D-8GBXL, F3-14900CL9Q-16GBXL, F3-14900CL9Q-16GBZL, F3-14900CL9S-4GBXL

Pitanja o ovom artiklu

Will this module fit a motherboard that only accepts DDR3 240-pin DIMMs?

The module is a DDR3 240-pin DIMM, so it fits any desktop board with a standard DDR3 DIMM slot.

Can I mix this CL13 stick with existing CL9 memory running at 1866 MHz?

Mixing different CAS latencies works; the system will run all modules at the slowest timing, here CL13.

Does the 1.5 V rating match the standard DDR3 voltage my board expects?

Yes, 1.5 V is the standard DDR3 operating voltage and matches what DDR3 desktop boards require.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.