Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green rectangular DDR3 DIMM with gold contacts and black chips

A-Tech

A-Tech 8GB DDR3 1600 ECC RDIMM 2Rx4 for Crucial CT102472BB160B Server RAM

SKU CH-7NKZ-7K89E

8GB DDR3 1600 ECC registered server module with CL11 timing and 1.5V operation

  • Capacity8GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8 GB capacity lets servers handle larger workloads
  • DDR3 1600 speed with CL11 latency supports fast data access
  • ECC RDIMM design detects and corrects memory errors
  • Registered 2Rx4 organisation improves signal integrity on 240-pin DIMM
  • 5 V standard voltage matches DDR3 platform requirements

8 GB DDR3 1600 ECC RDIMM

This 8 GB DDR3 1600 module is built for servers and workstations that require error-correcting registered memory. It suits administrators upgrading compatible platforms where ECC RDIMM support is mandatory. Buyers who need non-ECC or unbuffered DIMMs for desktop boards cannot use this module.

240-pin registered DIMM for DDR3 slots

The stick fits a standard DDR3 240-pin slot and presents a 2Rx4 organisation to the memory controller. It requires a platform that accepts registered ECC DIMMs at 1.5 V; consumer chipsets without ECC support will not recognise it. The module frees an empty slot for additional capacity when the system has spare DIMM positions.

1.5 V operation at CL11 1600 MHz

Running at the DDR3 standard voltage of 1.50 V with CAS latency 11, the module draws typical registered DIMM power for its speed grade. The registered buffer adds negligible latency while improving signal integrity in multi-DIMM configurations. Under normal server workloads thermals remain within standard DDR3 limits and acoustic output is limited to case airflow.

Istaknuto

  • 8 GB capacity lets servers handle larger workloads
  • DDR3 1600 speed with CL11 latency supports fast data access
  • ECC RDIMM design detects and corrects memory errors
  • Registered 2Rx4 organisation improves signal integrity on 240-pin DIMM
  • 5 V standard voltage matches DDR3 platform requirements

Specifikacije

BrandA-Tech
Capacity8GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Pitanja o ovom artiklu

Will the CL11 latency become the bottleneck during sustained server workloads?

At DDR3 1600 speed the CL11 timing sets the access latency floor; sustained heavy loads will hit this limit before bandwidth saturates.

How much heat and power does the registered ECC design add when running 24/7?

The module runs at standard 1.50 V DDR3 voltage; registered buffering adds minimal extra draw and heat compared with unbuffered DIMMs.

What motherboard slot and chipset must I already have for this 240-pin RDIMM to work?

You need a DDR3 240-pin RDIMM slot on a server or workstation board that supports ECC registered memory at 1600 MHz.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.