Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Glossy black aluminium GPU bracket, adjustable 10 to 129 mm height, fan-mount design

Adiven

Adiven GPU Support Bracket Aluminium 10-129mm Glossy Black

SKU CH-STAH-GCYSF

Adjustable aluminium brace mounts to 9, 12 or 14 cm fans and extends from 10 to 129 mm to stop graphics-card sag

  • ColorGlossy Black
  • OptionBlack
  • FeaturesHigh Performance GPU Support Bracket, Shipped by directly !
  • Prevents GPU sag with adjustable 10-129 mm height
  • Mounts directly to 9, 12 or 14 cm fans without blocking airflow
  • CNC-machined aluminium with electroplated glossy black finish
  • Fits ITX, MATX and ATX chassis
  • Tool-free setup includes mini spirit level for precise alignment

Fan-Mounted GPU Support

The Adiven bracket attaches directly to a graphics-card fan using the supplied screws, holding the card level without obstructing the fan exhaust. It suits builders who want a compact anti-sag solution that works with bottom-mounted case fans. It is not for systems that lack a compatible fan mount or that require support without using the fan frame.

9 12 14 cm Fan Compatibility

The bracket fits 9, 12 and 14 cm fans and includes two mounting screws that suit most models, though a minority of fan designs may not accept the supplied hardware. Clearance is limited to the fan mounting pattern, so builders must verify hole spacing before purchase.

10 to 129 mm Height Range

Adjustable from 10 mm to 129 mm, the CNC-machined aluminium brace accommodates ITX, MATX and ATX chassis heights. It handles typical single- and dual-slot cards within that span, but cannot support cards taller than the maximum extension or cases where the required height falls outside the range.

Istaknuto

  • Prevents GPU sag with adjustable 10-129 mm height
  • Mounts directly to 9, 12 or 14 cm fans without blocking airflow
  • CNC-machined aluminium with electroplated glossy black finish
  • Fits ITX, MATX and ATX chassis
  • Tool-free setup includes mini spirit level for precise alignment

Specifikacije

BrandAdiven
ModelHigh Performance GPU Support Bracket
Part NumberAD-CPUHD-DU
ColorGlossy Black
OptionBlack
FeaturesHigh Performance GPU Support Bracket, Shipped by directly !
Aluminum Graphics Cards Support for Fan Mounting: The Graphics Card support bracket is installed on the fan and fixed with screws. It does not block the fan air outlet and firmly supports the graphics card. A good choice if you have fans in the bottom of case
Widely compatible: the Graphics Card GPU Support Bracket supports 3 Fan Size: 9cm, 12cm and 14cm. Comes with 2 screws to mount fan, they fits for most fan. However, there are too many fan models on the market, and the screws may not be compatible for few fans,please not

Pitanja o ovom artiklu

How do I know if the adjustable height range suits my case?

The bracket adjusts from 10 to 129 mm, so measure the gap between your graphics card and the case floor or fan mount; if that distance falls inside the range the bracket will fit.

What does the 129 mm maximum height mean once the bracket is installed?

At full extension the bracket can bridge a 129 mm gap between the graphics card and the mounting point, preventing sag in tall tower cases or builds with a bottom-mounted fan.

Which fan sizes does the mounting interface support?

The included screws fit 9 cm, 12 cm and 14 cm fans, covering the three most common case and radiator fan diameters.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.