Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava

Axiom

Axiom EM4D-AX 2 x 32 GB DDR3 1066 ECC Registered server RAM

SKU CH-BMHG-Z3KNV MPN EM4D-AX

64 GB DDR3 ECC registered kit, two 32 GB modules at 1066 MHz CL9 and 1.35 V

  • Capacity2 x 32 GB
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • 64 GB total capacity from two 32 GB modules
  • ECC Registered design detects and corrects memory errors
  • DDR3 1066 speed rated at PC3 8500 bandwidth
  • Low 1.35 V operation reduces power draw
  • CAS latency CL9 for responsive access timing

64 GB DDR3-1066 registered kit

This kit provides 64 GB of DDR3-1066 memory using two 32 GB registered DIMMs. It is built for servers that require ECC error correction and registered signal processing. The modules run at 1.35 V with a CAS latency of CL9. They use the standard 240-pin form factor.

Suited for DDR3 servers needing ECC registered DIMMs

Systems that accept DDR3 registered ECC modules at 1066 MHz can use this kit. It will not work in platforms that require unbuffered non-ECC memory or a different DDR generation. Builders needing higher frequencies or lower voltages should look elsewhere.

1066 MHz DDR3 speed (PC3-8500)

The memory operates at 1066 MHz, rated as PC3-8500. This speed determines whether the modules match the server's memory bus. Verify the platform supports DDR3-1066 registered ECC before purchase.

Istaknuto

  • 64 GB total capacity from two 32 GB modules
  • ECC Registered design detects and corrects memory errors
  • DDR3 1066 speed rated at PC3 8500 bandwidth
  • Low 1.35 V operation reduces power draw
  • CAS latency CL9 for responsive access timing

Specifikacije

BrandAxiom
ModelEM4D-AX
Capacity2 x 32 GB
Type240-Pin DDR3 SDRAM
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Težina pošiljke0.09 kg
Dimenzije pakiranja152 × 76 × 25 mm

Pitanja o ovom artiklu

Does my server need 240-pin DDR3 slots and support for 1.35 V registered ECC DIMMs to use this kit?

Yes, each module is a 240-pin DDR3 DIMM rated at 1.35 V with ECC and registered signal processing, so the motherboard must provide DDR3 slots that accept registered ECC memory at that voltage.

Can I run these 1066 MHz CL9 modules in a system that currently uses slower DDR3 memory?

The kit operates at DDR3-1066 with CL9 timing; the memory controller will set a common speed for all installed DIMMs, so older slower modules will limit the kit to the lowest shared frequency.

How can I confirm the full 64 GB is recognised and ECC is active after installation?

Check the BIOS or UEFI memory information screen for 64 GB total capacity and ECC status enabled, then verify in the operating system with tools such as dmidecode or CPU-Z that show ECC correction active.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.