BGears
BGears b-BlasterPWM 80 80mm case fan 600-5000 RPM 98 CFM
An 80 mm PWM case fan with dual ball bearings delivering up to 98 CFM airflow between 600 and 5000 RPM
- Fan Size80mm
- Bearing Type2 Ball
- RPM600 to 5000RPM±10%
- Air Flow8.5
- LEDNone
- Dimensions80x80x25mm
- Wide speed range from 600 to 5000 RPM
- High airflow of 98 CFM for strong cooling
- Dual ball bearing for long service life
- PWM control enables precise speed adjustment
- Compact 80 x 80 x 25 mm frame fits tight spaces
80 mm PWM case fan
The BGears b-BlasterPWM 80 is an 80 mm case fan built around a two-ball bearing and a four-pin PWM interface. It runs on 12 VDC and fits standard 80x80x25 mm mounting holes found in compact chassis and legacy enclosures.
Builders with tight clearance
This fan suits builders who need high airflow from an 80 mm frame and want speed control via PWM. Buyers who require larger frame sizes, integrated lighting or lower maximum noise levels should consider other form factors.
98 CFM peak airflow
At full speed the fan delivers 98 CFM with a maximum static pressure of 9.5 mmH2O. That single figure determines whether it can push enough air through restrictive filters or dense heatsinks in the target build.
Istaknuto
- Wide speed range from 600 to 5000 RPM
- High airflow of 98 CFM for strong cooling
- Dual ball bearing for long service life
- PWM control enables precise speed adjustment
- Compact 80 x 80 x 25 mm frame fits tight spaces
Specifikacije
| Brand | Bgears |
|---|---|
| Series | Blaster |
| Model | PWM |
| Part Number | b-BlasterPWM 80 |
| Fan Size | 80mm |
| Bearing Type | 2 Ball |
| RPM | 600 to 5000RPM±10% |
| Air Flow | 8.5 |
| LED | None |
| Dimensions | 80x80x25mm |
| Težina pošiljke | 0.57 kg |
| Dimenzije pakiranja | 114 × 95 × 5 mm |
Pitanja o ovom artiklu
What comes with the fan and is a fan controller needed?
The fan includes a 4-pin PWM connector for direct motherboard control; no separate controller is required.
Which airflow figure should I use when comparing this 80 mm model?
The 98 CFM rating is the maximum airflow at zero static pressure; 8.5 CFM is the airflow at zero static pressure for PWM operation.
How loud is the fan at 5000 RPM in a typical case?
At 5000 RPM the fan draws 0.36 A and 4.32 W, delivering 98 CFM and 9.5 mmH₂O static pressure; actual noise depends on case damping and fan curve.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001044BTC
Na zalihi