Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
White 140mm case fan with 15 blades and 3-pin connector

BGears

BGears BG30033 140mm case fan 15 blades 1500 RPM 96.5 CFM 29.6 dBA 3-pin

SKU CH-3PVP-1NKWX MPN BG30033

A 140 mm case fan with 15 blades spins at 1500 RPM to deliver 96.5 CFM at 29.6 dBA using a 3‑pin connector

  • ColorWhite
  • PSU Main Connector3 pin
  • FeaturesSpecial 15 fan blades design for high performance high airfl
  • High airflow of 96.5 CFM from 15 blades at 1500 RPM
  • Quiet operation at 29.6 dBA with Fluid Dynamic Bearing
  • 140 mm frame fits standard case mounts
  • 3-pin connector enables voltage speed control
  • Includes 4 metal and 4 anti-vibration rubber screws

140mm 3-pin case fan

The BGears BG30033 is a 140mm case fan built around a 15-blade impeller and a fluid dynamic bearing. It connects via a standard 3-pin header and spins at 1500 RPM to deliver 96.5 CFM of airflow. The white frame includes both metal and anti-vibration rubber mounting screws for flexible installation. This fan suits builders who need a single high-airflow cooler for a standard chassis fan slot.

Upgrade from lower-airflow stock fans

The 15-blade design moves 96.5 CFM at 29.6 dBA, a measurable step up from basic 120mm fans that typically produce 82.6 CFM at 26.5 dBA. The jump is worth it when a case has 140mm mounting points and the CPU or GPU runs hot enough to need more volume than a smaller or slower fan can supply. Builders limited to 120mm slots or 4-pin PWM control cannot use this model.

Sustained-load behaviour

The fluid dynamic bearing maintains consistent rotation precision and anti-shock performance during extended operation, preventing the speed drift and noise rise common in sleeve-bearing units after months of continuous use. All cables are sleeve-wrapped to resist abrasion in tight routing paths. The 1500 RPM speed holds steady under load, keeping airflow at the rated 96.5 CFM without the thermal throttling cycles seen in fans that rely on aggressive speed curves.

Istaknuto

  • High airflow of 96.5 CFM from 15 blades at 1500 RPM
  • Quiet operation at 29.6 dBA with Fluid Dynamic Bearing
  • 140 mm frame fits standard case mounts
  • 3-pin connector enables voltage speed control
  • Includes 4 metal and 4 anti-vibration rubber screws

Specifikacije

BrandBgears
Part NumberBG30033
ColorWhite
PSU Main Connector3 pin
FeaturesSpecial 15 fan blades design for high performance high airflow for maximum cooling effect
Generate airflow of 82.6 CFM at only 26.5 dBA (120mm), and 96.5 CFM at only 29.6 dBA (140mm)
Innovative Fluid Dynamic Bearing design for longer life span, higher precision rotation with anti-shock function.
All cables are sleeve wrapped.
Težina pošiljke0.45 kg
Dimenzije pakiranja140 × 140 × 25 mm

Pitanja o ovom artiklu

Does the 140 mm fan include both metal and anti-vibration rubber screws for mounting?

Yes, the package supplies four metal screws and four anti-vibration rubber screws for 140 mm installation.

Which way should the 3-pin connector be oriented when plugging it into the motherboard header?

Align the keyed notch on the 3-pin connector with the tab on the motherboard header; the sleeve-wrapped cable only fits one way.

What bearing type is used and does it require lubrication over time?

The fan uses an Innovative Fluid Dynamic Bearing that is sealed for life and does not need user lubrication.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.