Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green 288-pin DDR4 UDIMM module, 16GB, black chips

Brute Networks

Brute Networks 16GB DDR4-2133 CL15 2Rx8 1.2V Non-ECC UDIMM

SKU CH-KDAG-M5W3F

16 GB DDR4 UDIMM running at 2133 MHz with CL15 latency and 1.2 V operation

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • 16GB DDR4-2133 CL15 capacity for responsive multitasking
  • 2V low-voltage operation reduces system power draw
  • 2Rx8 dual-rank organisation maximises memory density
  • 288-pin UDIMM form factor fits standard desktop slots
  • 100% HP T0E52AA compatible for guaranteed integration

HP Compatible 16GB DDR4 UDIMM

This Brute Networks module is a 16GB DDR4-2133 UDIMM built to HP part T0E52AA specifications. It suits desktop and workstation owners who need a direct replacement or capacity increase without changing platform. The 288-pin unregistered design fits standard consumer DIMM slots and uses major-brand DRAM from Samsung, SK Hynix or Micron.

CL15 1.2V low-voltage operation

Rated at CL15 latency and 1.20V, the stick runs at the standard DDR4 voltage envelope. Power draw stays within normal DDR4 limits so thermals and fan noise remain unchanged from the memory already installed. No additional cooling or voltage tuning is required for stable operation at 2133 MHz.

288-pin single-module upgrade

The single 16GB rank installs in any free 288-pin DDR4 slot, leaving remaining banks open for further expansion. It frees the builder from hunting matched kits when only one slot is available or when mixing with existing modules of the same speed and voltage. Compatibility is limited to systems that accept non-ECC unregistered DDR4 UDIMMs.

Istaknuto

  • 16GB DDR4-2133 CL15 capacity for responsive multitasking
  • 2V low-voltage operation reduces system power draw
  • 2Rx8 dual-rank organisation maximises memory density
  • 288-pin UDIMM form factor fits standard desktop slots
  • 100% HP T0E52AA compatible for guaranteed integration

Specifikacije

BrandHP
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset

Pitanja o ovom artiklu

How do I install the 288-Pin DDR4 UDIMM and what step is often missed?

Power off the system, open the case, align the notch on the 288-Pin DDR4 module with the slot key, press firmly until both side clips snap shut, then verify in BIOS that 16GB at DDR4-2133 CL15 is recognised.

What maintenance or replacement will the 16GB DDR4-2133 module need later?

No scheduled maintenance is required; keep the DIMM and slot contacts dust-free and reseat the 288-Pin module only if the system fails to detect the full 16GB capacity.

What limit appears first when the 2Rx8 1.2V Non-ECC UDIMM runs under sustained load?

The JEDEC-rated DDR4-2133 CL15 timing at 1.2V is the first ceiling; sustained workloads cannot exceed this speed or latency without manual overclocking beyond specification.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.