Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green DDR4 memory modules with gold contacts, no heat spreaders, 288-pin registered DIMM form factor

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR4 2133MHz ECC Registered DIMM CL15 1.2V 288-Pin B7

SKU CH-8BA3-1F77A

16 GB DDR4 ECC registered memory kit for Dell PowerEdge R430, R530 and T430 servers

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Timing15-15-15
  • Voltage1.2V
  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy multi-DIMM loads
  • 2133 MHz DDR4 speed matches Dell PowerEdge specs
  • 2 V operation reduces power draw per module
  • 2×8 GB kit populates two slots for 16 GB total

ECC Registered DDR4 for Dell PowerEdge

This 16GB kit contains two 8GB DDR4 2133MHz registered DIMMs with ECC. It is built for Dell PowerEdge R430, R530 and T430 servers that require registered error-correcting memory. The modules run at 1.2V with CL15 timing and use a 288-pin interface.

Simple DIMM installation with bank rules

Installation follows standard server DIMM procedures: power down, open the chassis and seat each module in the correct slot. The system accepts either registered ECC or unbuffered ECC but does not support mixing the two types. Within a single memory bank, all modules must be identical; different 4GB part numbers such as 313 and 3138 may coexist in the system but not in the same bank.

16GB kit within a 384GB ceiling

The kit provides 16GB of the 384GB maximum supported by these platforms when fully populated with registered ECC RDIMMs. Each CPU offers four sockets, giving eight slots total across two processors. This two-module kit leaves ample room for future expansion while delivering registered ECC reliability for current workloads.

Istaknuto

  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy multi-DIMM loads
  • 2133 MHz DDR4 speed matches Dell PowerEdge specs
  • 2 V operation reduces power draw per module
  • 2×8 GB kit populates two slots for 16 GB total

Specifikacije

BrandComputer Memory Solutions
ModelCM1024722133ECCREG2R8
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Timing15-15-15
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Poweredge R430, Poweredge R530, Poweredge T430
Package Content2 Memory RAM Sticks

Pitanja o ovom artiklu

How do I verify the memory is running at 2133 MHz CL15 with ECC registered after installation?

Check the system BIOS or UEFI memory configuration screen; it should report 2133 MHz, CL15 timing, 1.2 V, ECC enabled and registered mode for each installed module.

What is included in the box and do I need anything else for a Dell PowerEdge R430, R530 or T430?

The kit contains two 8 GB DDR4 288-pin registered ECC DIMMs; no extra parts are required for the listed servers.

Should I choose the 16 GB 2×8 GB kit or a different capacity for these servers?

The 2×8 GB kit provides 16 GB total; the platforms support up to 384 GB of registered ECC RDIMMs, so add more identical kits if your workload needs more capacity.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.