Computer Memory Solutions
Computer Memory Solutions CM5126412800DIMM 8GB (2x4GB) DDR3 1600MHz CL11 memory upgrade
8GB dual-channel DDR3 kit with two 4GB DIMMs at 1600MHz CL11 for compatible Gateway desktops
- Capacity8GB (2 x 4GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1600 (PC3 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.5V
- 8GB dual-channel kit boosts multitasking on Gateway SX2855-UR20P, SX2855-UR21P, SX2865-UR26
- 1600 MHz DDR3 speed matches PC3-12800 spec for responsive desktop performance
- CL11 11-11-11 timing at 1.5 V delivers stable operation without voltage tuning
- 240-pin unbuffered non-ECC DIMMs install directly into the two available memory slots
- Major-brand DRAM chips backed by limited lifetime warranty against manufacturing defects
Compatibility Targeted Upgrade
This 8 GB kit uses two 4 GB DDR3 modules rated at 1600 MHz with CL11 timing. It is built specifically for Gateway SX2855-UR20P, SX2855-UR21P and SX2865-UR26 desktops. The 240-pin DIMMs run at 1.5 V and are unbuffered non-ECC.
Who Should Choose This
Owners of the listed Gateway models who need to reach the 8 GB maximum will find the correct configuration here. Builders working with other platforms or requiring ECC, registered modules or a different voltage should look elsewhere.
Deciding Specification
The modules are DDR3 1600 (PC3 12800) with 11-11-11 latency. If your system demands DDR3 1600 unbuffered non-ECC DIMMs in a two-slot layout, this kit matches that requirement.
Istaknuto
- 8GB dual-channel kit boosts multitasking on Gateway SX2855-UR20P, SX2855-UR21P, SX2865-UR26
- 1600 MHz DDR3 speed matches PC3-12800 spec for responsive desktop performance
- CL11 11-11-11 timing at 1.5 V delivers stable operation without voltage tuning
- 240-pin unbuffered non-ECC DIMMs install directly into the two available memory slots
- Major-brand DRAM chips backed by limited lifetime warranty against manufacturing defects
Specifikacije
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126412800DIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Gateway SX2855-UR20P, SX2855-UR21P, SX2865-UR26 |
| Package Content | 2 Memory RAM Sticks |
Pitanja o ovom artiklu
Will the 240-pin DDR3 DIMMs fit the two memory slots in my Gateway SX2855-UR20P?
Yes, the kit is built for the two DIMM sockets in the Gateway SX2855-UR20P, SX2855-UR21P and SX2865-UR26 and matches the 240-pin DDR3 form factor those systems use.
What is the correct way to seat both 4 GB modules so the firmware recognises the full 8 GB?
Power off the PC, open the case, align each module's notch with the slot key, press down firmly until the side clips click on both sticks, then boot to confirm 8 GB appears in BIOS.
When should I expect to replace these CL11 1.5 V sticks?
DDR3 modules have no moving parts and typically last the life of the Gateway SX2855 or SX2865; replace only if memory errors appear or a future upgrade demands more capacity.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.



