Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two white DDR4 modules with anodized aluminium heat spreaders and RGB LEDs

Corsair

Corsair Vengeance RGB Pro CMW16GX4M2E3200C16W 16GB desktop RAM

SKU CH-3DSZ-FGHHB MPN CMW16GX4M2E3200C16W

Dual-channel 16GB DDR4 kit at 3200MHz CL16 with white anodized heat spreaders and 10 RGB LEDs per module controlled via iCUE software

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL16
  • Timing16-20-20-38
  • Voltage1.35V

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit gives capacity for multitasking and gaming
  • DDR4 3200 speed with CL16 latency delivers responsive performance
  • 35 V operation reduces power draw and heat
  • 10 ultra-bright RGB LEDs per module create vivid lighting effects
  • iCUE software synchronises colours with other compatible components

Kit Composition & Target Builder

This Corsair Vengeance RGB Pro kit delivers 16 GB of DDR4 memory in a matched pair of 8 GB modules. The white anodized aluminum heat spreaders and dynamic multi-zone RGB lighting suit builders who want visible style inside a transparent case.

Platform Fit & Exclusions

The kit is validated for Intel 200, 300, 400 and 500 Series platforms plus AMD 300, 400, 500 Series, B550, X470 and X570 chipsets. Systems running older chipsets or laptops using SO-DIMM slots cannot use this 288-pin desktop memory.

Decisive Specification

The memory runs at DDR4 3200 with a CL16 16-20-20-38 timing at 1.35 V using Intel XMP 2.0 profiles. If your motherboard cannot support that speed or latency combination, the kit will not operate at its rated performance.

Istaknuto

  • 16 GB dual-channel kit gives capacity for multitasking and gaming
  • DDR4 3200 speed with CL16 latency delivers responsive performance
  • 35 V operation reduces power draw and heat
  • 10 ultra-bright RGB LEDs per module create vivid lighting effects
  • iCUE software synchronises colours with other compatible components

Specifikacije

BrandCORSAIR
SeriesVengeance RGB Pro
ModelCMW16GX4M2E3200C16W
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL16
Timing16-20-20-38
Voltage1.35V
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorWhite
Heat SpreaderAnodized Aluminum
FeaturesDynamic Multi-Zone RGB Lighting
10 Ultra-bright RGB LEDs per module.
Next Generation Software
Take control in CORSAIR iCUE software and synchronize lighting with other CORSAIR RGB products, including CPU coolers, keyboards and fans.
Custom Performance PCB
Provides the highest signal quality for the greatest level of performance and stability.
Tightly Screened Memory
Carefully screened ICs for extended overclocking potential.
Maximum Bandwidth and Tight Response Times
Optimized for peak performance on the latest Intel and AMD DDR4 motherboards.
No Wires Required
Requires no extra wire
Recommend UseAMD 300 Series / AMD B550 / AMD X470 / AMD X570 / Intel 200 Series / Intel 300 Series / Intel 400 Series / AMD 400 Series / AMD 500 Series / Intel 500 Series
LED ColorRGB
Težina pošiljke0.14 kg
Dimenzije pakiranja165 × 135 × 25 mm

Druge verzije ovog modela

još 3 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What 288-pin DDR4 slots and clearance does the Vengeance RGB Pro need?

The modules use standard 288-pin DDR4 DIMM slots. The anodized aluminum heatspreader adds height, so verify your CPU cooler or case allows enough vertical clearance above the slots.

How do I enable the rated 3200 MT/s speed and CL16 timings, and what step is often missed?

Enable the Intel XMP 2.0 profile in the motherboard BIOS after installing both 8 GB modules; the common mistake is leaving the kit at default JEDEC speeds instead of activating the XMP profile.

What upkeep will the 10 RGB LEDs per module and the anodized aluminum heatspreader require over time?

Dust the heatspreader fins occasionally with compressed air to maintain cooling; the LEDs are sealed and need no maintenance, while lighting behaviour is managed through CORSAIR iCUE software.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.