Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Single tower CPU cooler with nickel-plated copper base, six heat pipes and 120 mm fan

COUGAR

COUGAR FORZA 85 ESSENTIAL CPU cooler

SKU CH-SW9P-RMV3T

Single-tower air cooler with nickel-plated copper base, six heat pipes and 120 mm hydraulic-bearing fan spinning 600-2000 RPM for 82.48 CFM at 34.5 dB(A).

  • TypeAir Cooler
  • Fan Size120mm
  • CPU Socket CompatibilityAMD Socket AM2 / AMD Socket AM2+ / AMD Socket AM3 / AMD Sock
  • Bearing TypeHydraulic Bearing
  • RPM600-2000 RPM
  • Air Flow82.48 CFM
  • High airflow reaches 82.48 CFM for strong cooling
  • Quiet operation stays at 34.5 dB(A) even at full speed
  • Fan spins up to 2000 RPM for high static pressure
  • Vacuum tunnel fin design boosts airflow through the heatsink
  • Nickel-clad copper base with six heat pipes moves heat fast

Single tower cooler for mid- to high-level CPUs

The COUGAR FORZA 85 ESSENTIAL is a single tower air cooler designed for mid- to high-level processors. It uses a nickel-clad copper base with six heat pipes and a 120 mm hydraulic-bearing fan. The fan runs between 600 and 2000 RPM, moving 82.48 CFM at a maximum of 34.5 dB(A). A vacuum tunnel fin design with 90-degree flipped ends directs airflow through the heatsink.

Check socket and case clearance before ordering

Verify that your motherboard uses one of the listed Intel or AMD sockets and that the 4-pin fan header is available. The cooler stands 160 mm tall and the heatsink measures 85 by 135 mm, so confirm your case allows at least that much clearance. The unit weighs more than 450 g; ensure the motherboard mounting area can support the mass.

Suits builders wanting quiet performance

This cooler suits users who want strong thermal performance with low noise in a standard ATX or mid-tower build. It is not for compact cases that cannot accommodate a 160 mm height, nor for extreme overclocking loads that exceed the capacity of a single 120 mm tower design.

Istaknuto

  • High airflow reaches 82.48 CFM for strong cooling
  • Quiet operation stays at 34.5 dB(A) even at full speed
  • Fan spins up to 2000 RPM for high static pressure
  • Vacuum tunnel fin design boosts airflow through the heatsink
  • Nickel-clad copper base with six heat pipes moves heat fast

Specifikacije

BrandCOUGAR
SeriesFORZA
ModelFORZA 85 ESSENTIAL
Part NumberFORZA 85 ESSENTIAL
TypeAir Cooler
Fan Size120mm
CPU Socket CompatibilityAMD Socket AM2 / AMD Socket AM2+ / AMD Socket AM3 / AMD Socket AM3+ / AMD Socket AM4 / AMD Socket AM5 / AMD Socket FM1 / AMD Socket FM2 / Intel LGA 1150 / Intel LGA 1151 / Intel LGA 1155 / Intel LGA 1156 / Intel LGA 1200 / Intel LGA 1366 / Intel LGA 1700 / Intel LGA 2011 / Intel LGA 2066
Bearing TypeHydraulic Bearing
RPM600-2000 RPM
Air Flow82.48 CFM
Noise Level34.5 dB(A) (Max.)
Power Connector4 Pin
Heatsink MaterialCopper with nickel plated
Fan Mounting Types to HeatsinkVertical
Max CPU Cooler Height160 mm
Fan Dimensions120 x 120 x 25 mm
Heatsink Dimensions85 x 135 x 160mm
WeightMore than 450g

Pitanja o ovom artiklu

What comes in the box and do I need to buy any mounting hardware separately for my socket?

The package includes the cooler with pre-installed fan, a nickel-clad copper base with six heat pipes, and an Intel/AMD bracket set covering LGA 1150, 1151, 1155, 1156 and AMD AM2 through AM5 plus FM1/FM2, so no extra mounting kit is required for those sockets.

The specs list a single 120 mm fan at 600–2000 RPM and 82.48 CFM — is that the only version or are there other capacity options?

This model is offered in one configuration: a single-tower heatsink measuring 85 x 135 x 160 mm with one 120 x 120 x 25 mm hydraulic-bearing fan, so there are no alternative fan sizes, heat-pipe counts or height variants to choose from.

The headline shows 34.5 dB(A) maximum noise and 2000 RPM — what does that mean for real-world CPU temperatures under load?

At full speed the fan moves 82.48 CFM through the vacuum-tunnel fin array, giving enough thermal headroom for mid-to-high-end CPUs and minor overclocking while staying under the 160 mm case-height limit.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.