DELL
DELL 007FPR 10TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive
A 10TB 3.5" SAS 12Gb/s hard drive spinning at 7200 RPM with hot-swap support
- InterfaceSAS 12Gb/s
- Capacity10TB
- RPM7200 RPM
- Form Factor3.5"
- 10 TB capacity stores large datasets
- 7200 RPM spindle delivers consistent throughput
- SAS 12 Gb/s interface enables fast data transfer
- 5 inch form factor fits standard drive bays
- Hot-swap tray allows drive replacement without downtime
Dell 007FPR 10TB nearline SAS drive
This 3.5 inch hard drive provides 10TB of storage on a SAS 12Gb/s interface spinning at 7200 RPM. It is built for servers and storage arrays that need high capacity with dual-port reliability. The nearline design targets workloads that are read-heavy but still require enterprise-grade firmware.
Sustained throughput and thermal behaviour
The 7.2K spindle speed delivers consistent sequential transfer rates across the full 10TB without the performance drop-off seen in archive-class drives. SAS 12Gb/s signalling keeps the bus saturated during long rebuilds or backup windows. Dual-port architecture maintains data paths if one controller path fails.
Hot-swap tray installation notes
The drive ships in a hot-swap tray that slides into compatible Dell bays without tools. Installers must verify the backplane supports SAS 12Gb/s and supplies the correct 12V and 5V rails. A mismatched backplane or missing firmware update are the most common reasons the drive is not recognised.
Istaknuto
- 10 TB capacity stores large datasets
- 7200 RPM spindle delivers consistent throughput
- SAS 12 Gb/s interface enables fast data transfer
- 5 inch form factor fits standard drive bays
- Hot-swap tray allows drive replacement without downtime
Specifikacije
| Brand | Dell |
|---|---|
| Model | 007FPR |
| Interface | SAS 12Gb/s |
| Capacity | 10TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Pitanja o ovom artiklu
How much power and heat does the 10TB 7200 RPM SAS drive produce during all-day operation?
The 7200 RPM Nearline SAS drive is built for continuous operation; its 12Gb/s interface and 3.5" form factor keep power draw and heat within typical enterprise 10TB limits.
What host connector and tray does my system need for this hot-swap 3.5" SAS drive?
You need a 12Gb/s SAS backplane or controller with a 3.5" hot-swap bay; the drive slides directly into the tray without extra adapters.
Will this 12Gb/s SAS drive negotiate down to work with my older 6Gb/s SAS controller?
Yes, the 12Gb/s SAS interface auto-negotiates to 6Gb/s or 3Gb/s, so the 10TB drive works on legacy SAS controllers while keeping full 10TB capacity.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.



