Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Silver 3.5 inch SAS hard drive bare unit

DELL

DELL 400-ANTK 8TB 3.5" SAS 12Gb/s 7200 RPM internal hard drive

SKU CH-E3A9-1PPGK

Stores 8 TB on a 3.5-inch SAS drive spinning at 7200 RPM with a 12 Gb/s interface

  • PackagingBare Drive
  • InterfaceSAS 12Gb/s
  • Capacity8TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 8 TB capacity stores large data sets
  • SAS 12 Gb/s interface moves files fast
  • 7 200 RPM spindle keeps throughput steady
  • 5 inch form factor fits standard bays
  • Dell part 400-ANTK ensures system match

Dell 400-ANTK 8TB SAS enterprise drive

This Dell 400-ANTK hard drive delivers 8TB of storage in a 3.5 inch form factor. It spins at 7200 RPM and connects through a SAS interface rated at 12Gb/s. The unit ships as a bare drive without a tray. It is built for desktop internal bays that accept SAS devices.

Suits servers and workstations with SAS backplanes

Administrators filling hot-swap bays that support 12Gb/s SAS will find the capacity and spindle speed appropriate for bulk data workloads. Systems limited to lower transfer rates or different physical connectors cannot accommodate this drive. Buyers needing a pre-mounted carrier should source the correct tray separately.

Interface SAS 12Gb/s decides compatibility

The drive communicates exclusively over SAS at 12Gb/s, so the host controller or backplane must support that exact signalling rate and protocol. A mismatch on either the electrical or protocol level will prevent the drive from being recognised. Verify the system documentation for SAS 12Gb/s support before purchase.

Istaknuto

  • 8 TB capacity stores large data sets
  • SAS 12 Gb/s interface moves files fast
  • 7 200 RPM spindle keeps throughput steady
  • 5 inch form factor fits standard bays
  • Dell part 400-ANTK ensures system match

Specifikacije

BrandDell
Model400-ANTK
PackagingBare Drive
InterfaceSAS 12Gb/s
Capacity8TB
RPM7200 RPM
Form Factor3.5"

Pitanja o ovom artiklu

How do I install the 3.5" SAS 12Gb/s drive and what step is often missed?

Mount the 3.5" drive in a SAS-compatible bay, connect the SAS data and power cables, then ensure the backplane or controller is set to 12Gb/s link speed; many builders leave the link at 6Gb/s by default.

What maintenance or replacement will the 7200 RPM SAS drive need later?

The 7200 RPM mechanical drive has no user-serviceable parts; plan to replace the unit once SMART attributes report reallocated sectors or the drive exceeds its rated workload limit.

What limit appears first on the 8TB SAS drive under sustained write loads?

The 12Gb/s SAS interface can burst higher, but the 7200 RPM platters sustain roughly 200 MB/s sequential throughput, so the mechanical media speed becomes the bottleneck first.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.