Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
35-piece 3D printer tool kit with nozzles, scrapers, and hex wrenches

EILKBLA 35pcs 3D Printer Tool Kit 3d printers accessory

SKU CH-PZ9D-V9DEQ

A 35-piece maintenance kit with a 1.5mm clog poke, 10 cleaning needles, silicone socks, nozzle wipers, plastic scraper, flush cutter, tweezers.

  • Type35pcs 3D Printer Tool Kit
  • Clears nozzle jams with a 1.5mm poke and 10× 0.4mm needles
  • Stabilises hotend temperature using 5 silicone socks and 4 nozzle wipers
  • Removes supports cleanly via plastic scraper with 10 replacement blades
  • Trims filament and fine debris using flush cutter and precision tweezers
  • Covers routine maintenance with H1.5 and H2.0 hex wrenches plus metal brush

Complete 35-Piece Maintenance Kit

This 35-piece tool kit is designed for owners of Bambu Lab X1, X1C, X1E, P1P and P1S printers. It bundles every routine maintenance item into a single package. The set covers nozzle care, clog clearing, support removal and general cleaning tasks. Makers who prefer one organised kit over sourcing parts individually will find it practical.

Sustained Maintenance Workflow

The kit supports repeated maintenance cycles rather than a single emergency fix. Ten replacement blades for the plastic scraper ensure long-term support removal without scratching build surfaces. Five silicone socks provide spare hotend insulation for many print sessions. Ten cleaning needles and a 1.5mm clog poke handle recurring nozzle jams for 1.75mm filament. Hex wrenches in H1.5 and H2.0 sizes allow repeated extruder adjustments.

Nozzle Wiper Holder Not Included

Four nozzle wipers are supplied for automatic cleaning during pre-print routines on X1 and P1 series machines. A separate wiper holder is required for installation and is not part of this set. Buyers without an existing holder must source or print one separately. This single constraint determines whether the nozzle wiping function works immediately.

Istaknuto

  • Clears nozzle jams with a 1.5mm poke and 10× 0.4mm needles
  • Stabilises hotend temperature using 5 silicone socks and 4 nozzle wipers
  • Removes supports cleanly via plastic scraper with 10 replacement blades
  • Trims filament and fine debris using flush cutter and precision tweezers
  • Covers routine maintenance with H1.5 and H2.0 hex wrenches plus metal brush

Specifikacije

BrandEILKBLA
Model35pcs 3D Printer Tool Kit
Part Number35pcs 3D Printer Tool Kit
Type35pcs 3D Printer Tool Kit

Pitanja o ovom artiklu

Does the 1.5 mm clog poke and 0.4 mm needles work on 1.75 mm filament without overheating the hotend?

Yes, the 1.5 mm poke and ten 0.4 mm needles are designed for 1.75 mm filament and clear jams mechanically without extra heat.

What extra part do I need to use the four nozzle wipers on my Bambu Lab X1 or P1 series?

A separate wiper holder is required for X1 and P1 series printers and is not included in the kit.

Will the five silicone socks and H1.5 or H2.0 hex wrenches fit the hotend and extruder on my Bambu Lab X1E?

The socks and both hex sizes are compatible with X1, X1C, X1E, P1P and P1S models for hotend insulation and extruder maintenance.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.