EN-Labs
EN-Labs 5VRGBSPL1X4 2-pack 5V 3-pin RGB 4-way splitter 1 ft
Two packs of 1 ft 5 V 3-pin AURA RGB splitters turn one motherboard header into four synchronous channels and include a male-to-male gender changer
- TypeRGB Cable
- Length1 foot
- Cable Length1 ft.
- FeaturesExtend the rare RGB interface on your motherboard to four Al
- Splits one 5 V header into four RGB channels
- 1 ft female-to-female cables keep internal routing tidy
- Includes male-to-male gender changer for header flexibility
- Two-pack lets you expand lighting on multiple boards
- Rated for 5 V AURA only — not 12 V systems
RGB splitter for 5 V AURA headers
This two-pack provides four female 3-pin connectors from a single motherboard 5 V AURA header. Each splitter is 1 foot long and includes a male-to-male gender changer for flexible routing. The cables are designed exclusively for 5 V 3-pin addressable RGB lighting.
Fits builds with limited RGB headers
The splitter plugs directly into the motherboard's 5 V 3-pin header and requires no external power supply. It frees up the single header so four LED strips or fans can be controlled synchronously through the board's lighting software. The 1-foot length suits compact routing inside small cases.
Handles up to four devices within power limits
The motherboard header typically supplies 5 V at 3 A for a total of 15 W, which the cable passes through without adding capacity. Connected lighting runs should stay under 3.3 ft per channel to avoid voltage drop. If devices appear dimmed, the header is overloaded and the number of connected items must be reduced.
5 V only — not for 12 V systems
This splitter does not work with 12 V 4-pin RGB headers and will not power non-addressable analogue strips. Builders needing 12 V compatibility or more than four channels per header must use a different solution. The arrow mark on each plug must align with the 5 V pin on the motherboard for correct operation.
Istaknuto
- Splits one 5 V header into four RGB channels
- 1 ft female-to-female cables keep internal routing tidy
- Includes male-to-male gender changer for header flexibility
- Two-pack lets you expand lighting on multiple boards
- Rated for 5 V AURA only — not 12 V systems
Specifikacije
| Brand | EN-Labs |
|---|---|
| Model | 5VRGBSPL1X4 |
| Type | RGB Cable |
| Length | 1 foot |
| Cable Length | 1 ft. |
| Features | Extend the rare RGB interface on your motherboard to four Allow you to Control 4 channels RGB fans and lightning synchronously 5V 3-pin AURA RGB Lighting extension cable 1FT female to female RGB extension cable, Male to Male pin adapter is incldued Does NOT Compatible with 12V 4pin RGB system Notes: 1. Generally, RGB interface in motherboard can provide at least 5V/3A,15W power to periphery RGB device. The RGB cable no extra power suplly capacity. 2. Suggest to connect RGB lightning less than 3.3ft 3. If Connected RGB devices are dimmed out, means motherboard RGB interface is overlao |
Pitanja o ovom artiklu
How much power can the motherboard header deliver before the splitter hits its limit?
The motherboard RGB header typically supplies up to 5 V / 3 A, which is 15 W total for all connected devices.
Will the cable run hot or draw extra power when used continuously?
The splitter itself adds no extra power capacity; it only passes the motherboard's 5 V supply, so heat and draw stay within the header's 15 W limit.
What motherboard connector is required for this splitter to function?
A 5 V 3-pin AURA RGB header is required; the included male-to-male gender changer adapts the 1 ft female cable to that header.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 USD
0.00001037BTC
Na zalihi