GLOTRENDS SA3034A 4-Port PCIe SATA 3.0 Expansion Card
- PCI Express to SATA…
Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.
GLOTRENDS
Adds four SATA 3.0 ports over a PCIe 3.0 x2 link with an ASM1164 controller, includes cables and a 1:5 power splitter, and allows OS boot from the first port
Option 4-ports, X2
Precrtane verzije postoje, ali nisu dostupne ovdje.
The GLOTRENDS SA3234A adds four SATA III 6Gbps connections through a single PCI Express 3.0 X2 slot using the ASM1164 chip. It is built for desktop, server or NAS owners who need to attach up to four SATA drives simultaneously for a storage pool or software RAID. Only the first port supports OS booting, so the card suits secondary storage arrays rather than a primary boot drive.
The card operates without a fan or dedicated power connector, drawing all current from the slot itself. Four red LEDs show power status and blink during read or write activity, giving a quick visual check without adding noise or heat to the chassis. Both a 12 cm regular bracket and an 8 cm low-profile bracket are included to fit standard or slim cases.
Three of the four SATA ports are limited to data use and cannot start the OS, so builders who need multiple bootable drives must look elsewhere. The package supplies four 350 mm SATA III cables and a 1:5 SATA power splitter, leaving only drive mounting and a free PCIe X4, X8 or X16 slot as installation requirements.
| Type | PCI Express to SATA Card |
|---|
Druge verzije ovog modela
Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.
Insert the card into a PCI-Express 3.0 X2 slot, attach either the 12cm regular bracket or the 8cm low-profile bracket, connect the four 350mm SATA cables to your drives, and power them with the included 1:5 SATA splitter cable. Only port 1 supports OS booting.
The ASM1164 controller runs in AHCI mode with no hardware RAID, so no firmware updates are required. Replace the 350mm SATA cables or the 1:5 power splitter if connectors wear or cables are damaged.
Four SATA III 6Gbps ports share a PCI-Express 3.0 X2 upstream link capped at 2GB/s, so combined sequential transfers from multiple drives will hit that 2GB/s ceiling before individual SATA limits.
Također u ovoj kategoriji
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
Ono što šaljete, i ono u čemu gledate cijene.
Poslano iz Vašeg novčanika na blagajni
Samo prikaz — katalog je izražen u dolarima
Nijedna valuta ne odgovara.
Odaberite jezik na kojem Vam se stranica obraća.
Nema odgovarajućeg jezika.
Novi ste ovdje?
Već imate račun?
Ne postoji automatsko resetiranje: ova trgovina ne šalje e-poštu, stoga ne postoji jednokratna poveznica koju biste mogli zatražiti. Ostavite adresu uz svoj račun, netko će je ručno obraditi.
Zahtjev zaprimljen
Ništa neće stići u Vaš pretinac e-pošte — ova trgovina uopće ne šalje e-poštu. Netko će to ručno preuzeti.
Sjetili ste se?