Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
A standard ATX power supply unit with a matte black metal casing, a single cooling fan on one side

Gulfe

Gulfe ATX Power Supply for HP Pavilion A6500F A6519FH

SKU CH-EMWT-H9V2B

ATX power supply replaces legacy units in HP Pavilion A6500F and A6519FH with reduced depth, dual-voltage input, over-current protection, and SATA connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy HP Pavilion A6500F and A6519FH units
  • Reduced depth design fits tight chassis spaces measuring 5.9" height
  • Single fan provides airflow across 2.5 kg unit weight
  • Over current and over power protection safeguards connected components
  • 24-pin ATX, 4-pin P4, three SATA and two LP4 connectors included

Replacement ATX Supply for HP Pavilion

This Gulfe ATX power supply is built as a direct replacement for HP Pavilion A6500F and A6519FH desktop computers. It delivers standard output rails including +5 V, -5 V, +12 V1, +12 V2, +3.3 V, -12 V and +5 V standby. The unit includes over-current and over-power protection and is hi-pot tested for low ripple and noise. A single fan provides cooling in the reduced-depth chassis.

Compatibility Focus for Legacy HP Desktops

This unit suits owners of the listed HP Pavilion models who need a new ATX supply with the exact connector set those motherboards require. Builders working on other platforms should look elsewhere because the reduced-depth form factor and specific cable complement are tailored to these legacy systems. The supply does not support modern high-wattage graphics cards or newer motherboard power schemes.

24-Pin ATX Plus 4-Pin CPU Connector

The decisive specification is the connector complement: one 24-pin ATX (20+4) connector and one P4 12 V 4-pin CPU connector. Together with three SATA 15-pin, two LP4 4-pin and one floppy 4-pin lead, this matches the original HP wiring. If your motherboard needs an 8-pin EPS or additional PCIe power, this supply will not fit the build.

Istaknuto

  • Replaces legacy HP Pavilion A6500F and A6519FH units
  • Reduced depth design fits tight chassis spaces measuring 5.9" height
  • Single fan provides airflow across 2.5 kg unit weight
  • Over current and over power protection safeguards connected components
  • 24-pin ATX, 4-pin P4, three SATA and two LP4 connectors included

Specifikacije

BrandGulfe
TypeATX
Fans1
Weight2.5

Pitanja o ovom artiklu

How do I verify the Gulfe ATX power supply is working after installing it in my HP Pavilion A6500F?

The unit powers on with a rise time under 70 ms and maintains hold-up for at least 17 ms at nominal input. Fan spin and stable +5 V, +12 V1, +12 V2 and +3.3 V rails indicate correct operation.

Which connectors are included with this replacement PSU and what must I source separately?

Included: 24-pin ATX (20+4), one 4-pin P4 12 V, three SATA 15-pin, two LP4 4-pin and one floppy 4-pin. No extra cables are bundled; any additional adapters must be purchased separately.

My HP Pavilion A6519F needs a reduced-depth ATX unit — does this model fit?

Yes. Dimensions are 5.86" x 3.3" with a reduced depth of 5.9" height x 3.4" width, matching the legacy HP chassis clearance.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.