Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black plastic tray holding four 2.5 drives in one 5.25 bay

ICY DOCK

ICY DOCK MB344SP 4 x 2.5" to 5.25" hdd accessory

SKU CH-SR92-XRKD9 MPN MB344SP

Converts one 5.25" bay into four 2.5" SATA drive slots with tool-less mounting and open-frame cooling

  • ColorBlack
  • Conversion Tray1 x 5.25" Drive to 4 x 2.5" Bay
  • Mobile Rack Drives SupportMulti 2.5" Drives to 5.25" Bay
  • Protection CaseMultiple Drives
  • SpecificationsDrive Fit: 4 x 2.5” IDE/SATA HDD & SSD (7-9.5mm) Device Fit:
  • FeaturesFits 4 x 2.5” SATA HDD / SSD into a single 5.25” drive bay C

Model Brackets 4BAY

Precrtane verzije postoje, ali nisu dostupne ovdje.

  • Fits four 2.5" SATA drives in one 5.25" bay
  • Tool-less installation with drive stabilizer secures each drive
  • Open frame design enables passive cooling for all drives
  • Supports 2.5" HDD or SSD from 7mm to 9.5mm height
  • Stackable rack option organises multiple drive kits together

Four drives in one bay

The ICY DOCK MB344SP adapter fits four 2.5 inch SATA hard drives or solid-state drives into a single external 5.25 inch drive bay. It accepts drives measuring 7mm to 9.5mm in height. The open frame design allows passive airflow across all installed drives. The unit can also serve as a stackable drive organising rack outside a chassis.

Tool-less install with stabiliser

Each drive slides into the tray and locks without screws using the tool-less mechanism. An advanced drive stabiliser system holds every drive firmly to prevent vibration or accidental ejection. The tray mounts into the 5.25 inch bay with the included screws. No special tools or drive caddies are required for the installation.

Check bay height and drive thickness

Verify that your chassis provides a standard external 5.25 inch half-height bay opening. Confirm that each 2.5 inch SATA drive you plan to install measures between 7mm and 9.5mm thick. Drives outside this height range will not fit the stabiliser slots. Ensure you have four SATA data and power cables long enough to reach the bay location.

Istaknuto

  • Fits four 2.5" SATA drives in one 5.25" bay
  • Tool-less installation with drive stabilizer secures each drive
  • Open frame design enables passive cooling for all drives
  • Supports 2.5" HDD or SSD from 7mm to 9.5mm height
  • Stackable rack option organises multiple drive kits together

Specifikacije

BrandICY DOCK
ModelMB344SP
ColorBlack
Conversion Tray1 x 5.25" Drive to 4 x 2.5" Bay
Mobile Rack Drives SupportMulti 2.5" Drives to 5.25" Bay
Protection CaseMultiple Drives
SpecificationsDrive Fit: 4 x 2.5” IDE/SATA HDD & SSD (7-9.5mm)
Device Fit: 1 x 5.25" half height device bay
Material: Plastic
FeaturesFits 4 x 2.5” SATA HDD / SSD into a single 5.25” drive bay
Compatible with 2.5” HDD / SSD with 7mm to 9.5mm drive height
Tool-less drive installation design with advanced drive stabilizer system
Compatible with any standard external 5.25” bay
Open frame design for maximum passive cooling
Can be used as a stackable drive organizing rack
Package ContentsDevice, User Manual, Screws
Težina pošiljke0.16 kg
Dimenzije pakiranja163 × 157 × 56 mm

Druge verzije ovog modela

još 3 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How can I confirm the four drives are recognised after installing the MB344SP in a 5.25" bay?

Power on the system and check BIOS or Disk Management to see all four SATA drives listed; the open frame design keeps temperatures stable during the test.

What comes with the MB344SP and what must I provide myself?

The package includes the bracket, user manual and mounting screws; you must supply up to four 2.5" SATA drives (7 mm to 9.5 mm height) and SATA data and power cables.

Which drive heights does the MB344SP support for the four 2.5" bays?

It accepts any 2.5" SATA HDD or SSD from 7 mm up to 9.5 mm thick, so both slim and standard laptop drives fit without adapters.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.