Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Intel X710 OCP 3.0 dual-port 10GbE network adapter with twisted-pair connectors

Intel

Intel X710T2LOCPV3 10GbE OCP 3.0 network card

SKU CH-F7CJ-XWA50 MPN X710T2LOCPV3

Dual-port 10 Gbit/s OCP 3.0 adapter with PCIe 3.0 x8, multi-speed autonegotiation and virtualization offloads

  • Speed10 Gbit/s Data Transfer Rate
  • OCP 3.0 small form factor fits dense server chassis
  • 10 Gbit/s transfer rate with multi-speed support down to 100BASE-T X
  • Energy Efficient Ethernet reduces power during low data activity
  • Network virtualization offloads for VxLAN, GENEVE, NVGRE, MPLS and NSH
  • Intel Ethernet Flow Director steers application traffic in hardware

Intel X710-T2L OCP 3.0 10GbE Adapter

This Intel Ethernet Network Adapter uses the X710-AT2 controller to deliver two 10GBASE-T ports on an OCP NIC 3.0 small form factor. It connects through a PCI Express 3.0 x8 interface and is designed for server and cloud deployments that need high-density 10 Gbit/s connectivity over twisted-pair cabling.

Suited for servers needing multi-speed 10GBASE-T

The card autonegotiates down to 5, 2.5, 1 Gbit/s and 100 Mbit/s, so it fits racks that mix link speeds. It supports Energy Efficient Ethernet to cut power during low traffic and offers hardware offloads for VXLAN, GENEVE, NVGRE and MPLS. Buyers who need fibre ports, a different bracket height, or more than two ports should look elsewhere.

Deciding spec: OCP NIC 3.0 form factor

The adapter only fits systems that accept an OCP 3.0 mezzanine card with the specified bracket height. Verify the server chassis supports this exact form factor before purchase, as standard PCIe brackets will not work.

Istaknuto

  • OCP 3.0 small form factor fits dense server chassis
  • 10 Gbit/s transfer rate with multi-speed support down to 100BASE-T X
  • Energy Efficient Ethernet reduces power during low data activity
  • Network virtualization offloads for VxLAN, GENEVE, NVGRE, MPLS and NSH
  • Intel Ethernet Flow Director steers application traffic in hardware

Specifikacije

BrandIntel
ModelX710T2LOCPV3
Part NumberX710T2LOCPV3
Speed10 Gbit/s Data Transfer Rate
Težina pošiljke0.45 kg
Dimenzije pakiranja279 × 229 × 51 mm

Pitanja o ovom artiklu

Does the OCP 3.0 card draw less power when traffic drops off?

Energy Efficient Ethernet under IEEE 802.3az lowers power use during low-activity periods on the 10 Gbit/s ports.

What slot and bracket does this adapter need in the server?

It plugs into a PCI Express 3.0 x8 slot and uses the OCP bracket height defined by the OCP NIC 3.0 small form factor.

Will the 10 Gbit/s ports link to my existing 1 Gbit/s switches?

Multi-speed autonegotiation supports 100BASE-T X, 1 Gbit/s, 2.5 Gbit/s and 5 Gbit/s alongside the native 10 Gbit/s rate.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.