Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green circuit board with silver PCIe edge connector and two black SATA ports

KEERUN

KEERUN PCI-E to 2-port SATA3.0 expansion card

SKU CH-9W6S-8NZR3

Adds two SATA 6.0 Gbps ports through a PCI-Express x1 slot, compatible with Windows 7 through 10 and Linux

  • TypePCI Express to SATA Card
  • External USB Ports4x SATA III
  • Adds two SATA 6.0 Gbps ports via a single PCI-E x1 slot
  • Works with PCI-E 1.0, 2.0 and 3.0 motherboards
  • Supports Windows 7, 8, 8.1, 10 and Linux
  • Enables NCQ and hot-swap for responsive drive handling
  • Weighs only 0.05 kg for a lightweight build

Two SATA 3.0 ports for PCI-E systems

This KEERUN expansion card adds two SATA 3.0 7-pin connectors through a single PCI-Express x1 slot. It suits builders who need extra internal drive connections on a motherboard with limited native SATA headers. The card works with Windows 7 through 10 and Linux operating systems.

PCI-E 2.0 link caps real throughput at 6.0 Gbps

The adapter complies with the PCI-Express v2.0 specification and the Serial ATA 3.0 specification, so the bus can signal at 6.0 Gbps, 3.0 Gbps or 1.5 Gbps. Because the SATA lanes are converted from the PCI-E link, actual transfer rates fall short of the drive’s rated maximum, a limitation shared by every SATA expansion card of this type.

Low-profile PCB weighs .05 kg and fits any x1 slot

The board uses PCI-E 3.0 wiring and is backward compatible with PCI-Express v1.0 slots, accepting x1, x4, x8 or x16 physical connectors. Two standard SATA data ports support AHCI 1.0, IDE mode, NCQ and hot-swap operation, while the lightweight construction places minimal stress on the motherboard slot during daily use.

Istaknuto

  • Adds two SATA 6.0 Gbps ports via a single PCI-E x1 slot
  • Works with PCI-E 1.0, 2.0 and 3.0 motherboards
  • Supports Windows 7, 8, 8.1, 10 and Linux
  • Enables NCQ and hot-swap for responsive drive handling
  • Weighs only 0.05 kg for a lightweight build

Specifikacije

TypePCI Express to SATA Card
External USB Ports4x SATA III

Pitanja o ovom artiklu

Should I pick the 2-port or 4-port version of this card?

This listing is for the 2-port SATA3.0 expansion card; the 4-port model is a separate product.

Will my SSDs hit the full 6.0 Gbps SATA III speed through this card?

The supplier notes that PCI-E conversion causes signal loss so drives will not reach their nominal 6.0 Gbps rating.

Does the PCI-E x1 slot limit the card to PCI-Express 2.0 speeds?

The card complies with PCI-Express v2.0 and is backward compatible with v1.0, capping the bus at that generation.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.