Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Open-frame laser engraver with 3.5-inch touchscreen, 400 by 365 mm bed

LONGER

LONGER RAY5 20W Upgraded Laser Engraver 400×365mm

SKU CH-4MF3-8CB85

20 W laser engraver with a 400 × 365 mm work area, 0.08 × 0.1 mm spot, 3.5" touchscreen and four connection modes

  • TypeLaser Engraver

size RAY5 20W

Precrtane verzije postoje, ali nisu dostupne ovdje.

  • Faster engraving and cutting with 20 W laser power
  • Ultra-fine 0.08 × 0.1 mm spot for sharp detail
  • 256-colour capability adds vivid contrast on metal and glass
  • 5″ colour touchscreen plus USB, TF card, Wi-Fi and app control
  • 400 × 365 mm work area handles large wood, acrylic and steel pieces

20 W Laser Engraver for Makers

The LONGER RAY5 is a 20 W diode laser engraver built for hobbyists and small workshops that need a single machine for engraving and cutting wood, acrylic, leather, paper, glass, plastics and thin stainless steel. It arrives new with all tools and a manual for quick assembly.

400 × 365 mm Work Area

The usable bed measures 400 mm by 365 mm, which decides whether a project fits without re-positioning. A 0.08 × 0.1 mm compressed spot and 256-colour greyscale give fine detail on metal, glass and wood.

Sustained 10 000 mm/min Throughput

The manufacturer rates continuous processing speed at 10 000 mm/min, lower than the 24 000 mm/min peak, so plan jobs around the sustained rate for consistent results over long runs. An air-assist port helps keep optics clean during extended cuts.

Istaknuto

  • Faster engraving and cutting with 20 W laser power
  • Ultra-fine 0.08 × 0.1 mm spot for sharp detail
  • 256-colour capability adds vivid contrast on metal and glass
  • 5″ colour touchscreen plus USB, TF card, Wi-Fi and app control
  • 400 × 365 mm work area handles large wood, acrylic and steel pieces

Specifikacije

TypeLaser Engraver

Druge verzije ovog modela

još 1 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What does the 20 W laser power mean for cutting thickness on this engraver?

The 20 W output lets the machine cut 25 mm wood and 35 mm acrylic in a single pass, and it can cut 0.05 mm stainless steel.

How do the USB, TF card, Wi-Fi and app connections limit file transfer or job control?

All four modes let you send jobs directly to the 3.5" touchscreen controller; the machine then runs the file offline so transfer speed does not affect engraving quality.

What bench space and mounting points does the 400×365 mm work area require?

The frame needs a flat surface at least 400 mm by 365 mm plus clearance for the gantry rails and the built-in touchscreen housing.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.