Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
LORDWORLD serial bus servo, compact metal body, matte finish, output horn on top

LORDWORLD

LORDWORLD 30KG Serial Bus Servo 360° Encoder 253 Units 12V

SKU CH-60SN-375ZQ

A serial-bus servo with a 360° magnetic encoder delivers 30 kg·cm torque at 12 V and supports up to 253 units on one UART line

  • Precise positioning with 360° magnetic encoder
  • High torque of 30 kg·cm at 12V
  • Control up to 253 servos via UART bus
  • Smooth motion through programmable acceleration and speed
  • Durable design built for long operational lifetime

Precision 360° Magnetic Encoder Servo

The LORDWORLD serial bus servo delivers 30kg·cm of torque at 12V and a 360° magnetic encoder for continuous position feedback. It targets robotics builders who need repeatable absolute-angle data in quadrupeds, hexapods or multi-joint arms where standard hobby servos lack resolution.

Thermal and Power Profile

Operating at 12V the servo draws peak current only during high-torque moves; the magnetic encoder adds negligible heat because it has no contacting elements. With no active cooling the unit relies on its aluminium case to dissipate warmth, so sustained full-load cycles in enclosed linkages should be monitored for temperature rise.

Daisy-Chain UART Control

A single UART bus can address up to 253 servos simultaneously, returning real-time position, velocity and temperature from each node. The acceleration start-stop function lets you program speed and acceleration profiles per servo, smoothing motion without an external motion controller. No bundled software or accessories are included beyond the servo itself.

Istaknuto

  • Precise positioning with 360° magnetic encoder
  • High torque of 30 kg·cm at 12V
  • Control up to 253 servos via UART bus
  • Smooth motion through programmable acceleration and speed
  • Durable design built for long operational lifetime

Specifikacije

BrandLORDWORLD

Pitanja o ovom artiklu

How do I daisy-chain multiple LORDWORLD 30KG servos on one UART bus and what ID range do I assign?

Wire each servo TX to the next RX on a single serial line, give every unit a unique ID between 1 and 253, and power the chain from a 12 V source capable of the combined load.

Which part of the 30KG servo wears first and how do I plan for replacement?

The output-gear train and magnetic encoder bearings carry the 30 kg·cm load; keep a spare servo on hand so a worn unit can be swapped without rewiring the bus.

What thermal or electrical limit appears first when the 30KG servo runs at full 30 kg·cm torque continuously?

Sustained 30 kg·cm output at 12 V drives the motor to its stall-current ceiling, so the winding temperature limit is reached before the encoder or bus bandwidth saturates.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.