Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Grey aluminium dual-bay M.2 NVMe SATA RAID enclosure with USB-C 20Gbps, cooling fan, magnetic cover and two data cables

MAIWO

MAIWO K2042P3 Dual Bay M.2 NVMe SATA RAID Enclosure 20Gbps USB-C

SKU CH-TFBQ-NYARK

Dual-bay M.2 enclosure handles NVMe and SATA SSDs with 20 Gbps USB-C, hardware RAID 0/1, offline clone and active cooling

  • ColorGrey
  • SizeM.2
  • AC AdapterYes
  • MaterialAluminum / Steel
  • External InterfaceType-C
  • Supports M.2 NVMe and SATA SSDs in 2230 2242 2260 2280 sizes
  • 20Gbps USB 3.2 Gen2x2 with JMS586R chipset for fast transfers
  • Offline or online clone plus RAID 0 RAID 1 PM modes
  • Built-in fan aluminum shell and thermal pads keep drives cool
  • Tool-free magnetic cover includes 31.5-inch cables 5V 3A adapter

Dual-bay M.2 enclosure

The MAIWO K2042P3 accepts two M.2 SSDs in sizes 2230, 2242, 2260 or 2280, supporting both NVMe M Key and SATA B+M Key drives. It connects via USB-C and works with Windows, macOS and Linux. The magnetic cover enables tool-free installation.

USB 3.2 Gen2x2 20Gbps interface

The JMS586R chipset delivers up to 20Gbps bandwidth when the host port supports USB 3.2 Gen2x2. UASP and TRIM are supported on Windows 8.1 and above. Speed falls back through USB 3.2, 3.1, 3.0 and 2.0 on older ports. Cloning requires both drives to share the same protocol.

16TB total capacity with RAID and clone modes

RAID 0 combines both drives for maximum throughput, RAID 1 mirrors data for redundancy and PM mode presents each drive independently. Offline and online cloning copies NVMe to NVMe or SATA to SATA. The 5V 3A adapter powers the enclosure and built-in cooling fan.

Istaknuto

  • Supports M.2 NVMe and SATA SSDs in 2230 2242 2260 2280 sizes
  • 20Gbps USB 3.2 Gen2x2 with JMS586R chipset for fast transfers
  • Offline or online clone plus RAID 0 RAID 1 PM modes
  • Built-in fan aluminum shell and thermal pads keep drives cool
  • Tool-free magnetic cover includes 31.5-inch cables 5V 3A adapter

Specifikacije

BrandMAIWO
SeriesDual Bay NVMe Enclosure
ModelK2042P3
ColorGrey
SizeM.2
AC AdapterYes
MaterialAluminum / Steel
External InterfaceType-C

Pitanja o ovom artiklu

Which SSD sizes and protocols does the K2042P3 accept?

It takes M.2 NVMe M Key and M.2 SATA B+M Key drives in 2230, 2242, 2260 and 2280 mm lengths.

What real-world speed can I expect from the 20 Gbps USB 3.2 Gen2x2 link?

The JMS586R chipset and UASP support let each NVMe or SATA SSD run at its native limit, so large transfers hit the drive’s own ceiling rather than the port’s.

What does the USB-C 3.2 Gen2x2 interface actually cap in daily use?

The 20 Gbps ceiling is shared between the two bays; with one drive you can saturate the bus, with two in RAID 0 the combined throughput still tops out at 20 Gbps.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.