Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Silver 3.5 inch bare hard drive with circuit board visible

Maxtor

Maxtor DiamondMax 10 6L200P0 200GB 7200 RPM 8MB IDE Ultra ATA133 3.5" internal hard drive

SKU CH-3GQS-2G0WB MPN 6L200P0

A 200GB 3.5" IDE desktop drive spinning at 7200 RPM with 8MB cache and 9ms seek time for quiet, reliable storage

  • PackagingBare Drive
  • InterfaceIDE Ultra ATA133 / ATA-7
  • Capacity200GB
  • RPM7200 RPM
  • Cache8MB
  • Average Seek Time9ms
  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB cache buffer accelerates frequent read and write operations
  • 200 GB capacity stores operating system, applications and personal files
  • 9 ms average seek time reduces data access delays
  • Fluid dynamic bearing motor ensures quiet operation

Maxtor DiamondMax 10 200GB IDE Drive

The Maxtor DiamondMax 10 6L200P0 is a 200GB desktop internal hard drive spinning at 7200 RPM with an 8MB cache. It connects via an IDE Ultra ATA133 interface and fits a standard 3.5-inch bay. A fluid dynamic bearing motor keeps acoustic levels low during operation.

Ideal for Legacy IDE Systems and Repairs

This drive suits technicians restoring or expanding older PCs that still use a parallel ATA bus. It also works as a direct replacement for a failed Maxtor DiamondMax 10 unit in existing arrays. Builders planning new systems with only serial ATA ports or needing capacities above 200GB should consider other options.

IDE Ultra ATA133 Interface Determines Compatibility

The single specification that decides fit is the IDE Ultra ATA133 connection. Motherboards or controllers must provide a native 40-pin ATA-7 channel or a compatible adapter. Without that interface the drive cannot communicate with the host system.

Istaknuto

  • 7200 RPM spindle speed delivers responsive desktop performance
  • 8 MB cache buffer accelerates frequent read and write operations
  • 200 GB capacity stores operating system, applications and personal files
  • 9 ms average seek time reduces data access delays
  • Fluid dynamic bearing motor ensures quiet operation

Specifikacije

BrandMaxtor
SeriesDiamondMax 10
Model6L200P0
PackagingBare Drive
InterfaceIDE Ultra ATA133 / ATA-7
Capacity200GB
RPM7200 RPM
Cache8MB
Average Seek Time9ms
Average Latency4.17ms
FeaturesFluid dynamic bearing motor for quiet operation
RoHS compliant
Improved reliability with:
Shock Protection System
Data Protection System
Form Factor3.5"
Težina pošiljke0.68 kg
Dimenzije pakiranja203 × 152 × 51 mm

Pitanja o ovom artiklu

What does the IDE Ultra ATA133 interface cap the maximum transfer rate at?

The IDE Ultra ATA133 interface caps the burst transfer rate at 133 MB/s, though sustained throughput will be lower and limited by the 7200 RPM mechanical speed and 8MB cache.

What physical space and mounting does this 3.5 inch drive require?

This 3.5 inch form factor drive needs a standard 3.5 inch drive bay or cage with bottom or side mounting holes and clearance for the IDE data connector and Molex power plug on the rear edge.

How is the drive installed, and what jumper step is often missed?

Connect the 40-pin IDE cable and Molex power, secure the drive with four screws, then set the rear jumper block to Master, Slave or Cable Select to match the channel configuration — skipping this causes the BIOS to not detect the 200GB volume.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.