Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
White Micro ATX case with leather strap and tempered glass side panel

Montech

Montech Heritage White Micro ATX PC Case

SKU CH-2KXM-CKCC1

White micro-ATX case with leather strap carries up to 40 kg and fits a 360 mm radiator plus 40-series GPU

  • TypeMicro ATX/Mini ITX (Backplane)
  • ColorWhite
  • Case MaterialSteel / Leather / Tempered Glass
  • Motherboard CompatibilityMicro ATX / Mini-ITX
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays1

Options Heritage White

Precrtane verzije postoje, ali nisu dostupne ovdje.

  • Portable design with leather strap supporting 40KG
  • Compact Micro ATX layout fits ATX PSU and 40-series GPU
  • 360mm radiator support at top for liquid cooling
  • Premium steel leather tempered glass construction
  • Five expansion slots plus multiple drive bays

Compact micro-ATX chassis with leather accent

The Montech Heritage White is a micro-ATX and Mini-ITX backplane case finished in white steel, eco-leather and tempered glass. It targets builders who want a distinctive, portable enclosure for a high-performance small-form-factor system. The integrated leather strap is rated to carry up to 40KG for easy transport.

Cooling capacity for sustained workloads

The chassis supports side intake with two 120mm fans, top mounts for three 120mm or two 140mm fans, three 120mm bottom fans and a single 120mm rear fan. A top radiator up to 360mm can be fitted, allowing liquid cooling for CPU and GPU during extended rendering or gaming sessions.

Upgrade path from larger towers

This case replaces a full-size ATX tower when desk space is limited but component performance must remain high. It accommodates an ATX power supply, a 40-series graphics card and a 360mm AIO simultaneously. Builders needing more than two 3.5-inch drives or additional expansion slots should consider a larger chassis.

Istaknuto

  • Portable design with leather strap supporting 40KG
  • Compact Micro ATX layout fits ATX PSU and 40-series GPU
  • 360mm radiator support at top for liquid cooling
  • Premium steel leather tempered glass construction
  • Five expansion slots plus multiple drive bays

Specifikacije

BrandMontech
ModelHeritage White
TypeMicro ATX/Mini ITX (Backplane)
ColorWhite
Case MaterialSteel / Leather / Tempered Glass
Motherboard CompatibilityMicro ATX / Mini-ITX
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Expansion Slots5
Fan OptionsSide:120mm*2 , Top:120*3/140*2, Bottom: 120*3,
Rear: 120*1
Radiator OptionsTop - Up to 360mm
Težina pošiljke8.71 kg
Dimenzije pakiranja559 × 457 × 318 mm

Druge verzije ovog modela

još 1 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How loud and hot does the case get when the side 120mm fans and top 140mm radiator run all day?

With two 120mm side fans and a top 360mm radiator supported, steady airflow keeps temperatures low; noise stays modest because larger fans move more air at lower RPM.

What motherboard and power supply must I already own for this backplane layout to work?

You need a Micro ATX or Mini-ITX motherboard and a standard ATX power supply; the backplane design mounts the board vertically behind the motherboard tray.

Will my older 3.5in mechanical drives and 2.5in SSDs fit without extra brackets?

Yes, the case provides two internal 3.5in bays and one 2.5in bay, so existing drives install directly.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.