Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
MSI Suprim GeForce RTX 4080 SUPER 16G graphics card with triple-fan TRI FROZR 3S cooler, brushed metal shroud and backplate, PCIe 4.0

MSI

MSI Suprim GeForce RTX 4080 SUPER 16G SUPRIM X graphics card

SKU CH-8ZFN-8JAJC

Delivers GeForce RTX 4080 SUPER performance with 16 GB GDDR6X, a 256-bit bus, 23 Gbps memory, 10240 CUDA cores and boost clocks up to 2655 MHz, cooled by TRI FROZR 3S with TORX FAN 5.0, vapor

  • InterfacePCI Express 4.0
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 40 Series
  • GPUGeForce RTX 4080 SUPER
  • ArchitectureAda Lovelace
  • Boost ClockExtreme Performance: 2655 MHz (MSI Center) Boost: 2640 MHz (
  • Boost up to 2655 MHz in Extreme Performance mode
  • 10240 CUDA cores accelerate 4K and AI workloads
  • 16 GB GDDR6X at 23 Gbps on a 256-bit bus
  • TRI FROZR 3S cooling with TORX FAN 5.0 and vapor chamber
  • HDMI 2.1a and three DisplayPort 1.4a drive four displays at 7680 × 4320

Suprim RTX 4080 SUPER 16GB

This MSI Suprim graphics card uses the NVIDIA Ada Lovelace architecture with 10240 CUDA cores and 16GB of GDDR6X memory on a 256-bit interface. It connects via PCI Express 4.0 and reaches a boost clock of 2655 MHz in Extreme Performance mode. The card supports DirectX 12 Ultimate and OpenGL 4.6 for modern gaming and creative workloads.

Upgrade from earlier 40 Series

Moving to this model adds the SUPER GPU with higher core counts and a 23 Gbps memory speed over the original RTX 4080. The TRI FROZR 3S cooling system uses TORX FAN 5.0, a Vapor Chamber and Core Pipes to handle the increased thermal load. The jump is worthwhile when you need more frame buffer for 4K gaming or professional rendering.

Suits 4K creators and high-refresh gamers

Display outputs include one HDMI 2.1a port supporting 4K at 120Hz and 8K at 60Hz plus three DisplayPort 1.4a connectors for multi-monitor setups up to 7680 x 4320. Buyers who only play at 1080p or need a smaller card for compact cases should consider a less expensive tier.

Istaknuto

  • Boost up to 2655 MHz in Extreme Performance mode
  • 10240 CUDA cores accelerate 4K and AI workloads
  • 16 GB GDDR6X at 23 Gbps on a 256-bit bus
  • TRI FROZR 3S cooling with TORX FAN 5.0 and vapor chamber
  • HDMI 2.1a and three DisplayPort 1.4a drive four displays at 7680 × 4320

Specifikacije

BrandMSI
SeriesSuprim
ModelRTX 4080 SUPER 16G SUPRIM X
InterfacePCI Express 4.0
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 40 Series
GPUGeForce RTX 4080 SUPER
ArchitectureAda Lovelace
Boost ClockExtreme Performance: 2655 MHz (MSI Center)
Boost: 2640 MHz (GAMING & SILENT Mode)
CUDA Cores10240
Effective Memory Clock23 Gbps
Memory Size16GB
Memory Interface256-Bit
Memory TypeGDDR6X
DirectXDirectX 12 Ultimate
OpenGLOpenGL 4.6
Multi-Monitor Support4
HDMI1 x HDMI (Supports 4K@120Hz HDR, 8K@60Hz HDR, and Variable Refresh Rate as specified in HDMI 2.1a)
DisplayPort3 x DisplayPort 1.4a
Max Resolution7680 x 4320
Virtual Reality ReadyYes
CoolerTriple Fans
Thermal Design Power320W
Recommended PSU Wattage850 W (Min.750 W)
Power Connector1 x 16-Pin
HDCP ReadyYes
Max GPU Length336 mm
Card Dimensions (L x H)142 x 78 mm

Pitanja o ovom artiklu

How many expansion slots does the TRI FROZR 3S cooler occupy?

The TRI FROZR 3S cooler uses a thick heatsink with a vapor chamber and core pipes that typically requires three expansion slots; measure your case clearance before ordering.

Which power connectors are needed and how should they be seated?

Connect three separate PCIe 8-pin cables from the power supply to the card's sockets; avoid daisy-chained cables so each connector carries its own current.

How do I clean the TORX FAN 5.0 assembly without damaging the ring arcs?

Hold the fan blades still, blow dust out with low-pressure compressed air, and wipe the ring arcs gently with a dry microfibre cloth; do not use liquids on the vapor chamber fins.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.