Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Sixteen green DDR5 RDIMM modules in a tray

NEMIX RAM

NEMIX RAM 1.5TB 16x96GB DDR5 4800 CL40 2Rx4 ECC RDIMM Supermicro H13SSH

SKU CH-15FS-1RM4V

1.5 TB DDR5 4800 RDIMM kit with 16 registered ECC modules at CL40 for Supermicro H13SSH

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.5TB 16X96GB

Prikaži još 30 konfiguracija
  • 5 TB total capacity from sixteen 96 GB modules for maximum memory density
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth at 1.1 V
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 288-pin RDIMM form factor matches Supermicro H13SSH memory-controller requirements exactly
  • Built with major-brand Samsung, Micron or Hynix DRAM chips for enterprise-grade reliability

1.5TB DDR5 ECC RDIMM Kit

This 1.5TB memory kit contains sixteen 96GB DDR5 Registered ECC RDIMMs built for the Supermicro H13SSH motherboard. It runs at 4800MHz with CL40 latency at 1.1V using a 2Rx4 organisation. The 288-pin modules install directly into the server board's memory slots.

Suited For Full-Population Servers

This kit suits administrators who need maximum registered ECC capacity on the H13SSH platform. Builders using consumer boards, workstations requiring UDIMM or SODIMM form factors, or systems that cannot accept registered memory should look elsewhere. The 2Rx4 rank structure matches the board's population rules for full-slot deployment.

2Rx4 Registered ECC Architecture

The 2Rx4 registered ECC design offloads the memory controller so all sixteen slots operate at the rated 4800MHz speed. ECC corrects single-bit errors on the fly to prevent silent data corruption. Verify your motherboard manual for approved DIMM population order before installation.

Istaknuto

  • 5 TB total capacity from sixteen 96 GB modules for maximum memory density
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth at 1.1 V
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 288-pin RDIMM form factor matches Supermicro H13SSH memory-controller requirements exactly
  • Built with major-brand Samsung, Micron or Hynix DRAM chips for enterprise-grade reliability

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Does my Supermicro H13SSH need all 16 DDR5 slots filled for this 1.5TB kit to function?

The kit is built for full population on the H13SSH. Each of the 16 modules is a 96GB 2Rx4 Registered ECC RDIMM at 1.1V CL40, matching the board's validated configuration so the memory controller recognises the full 1.5TB at DDR5-4800.

Can I mix these 2Rx4 DDR5 4800 RDIMMs with different-rank DDR5 modules already installed in the same H13SSH?

Mixing ranks or speeds on the H13SSH is not recommended. The board's memory-population rules expect identical 2Rx4 Registered ECC RDIMMs at 1.1V CL40 across every populated channel; mismatched modules can prevent full-capacity recognition or force down-clocking.

How do I confirm the H13SSH is running this 16-module kit at the rated DDR5-4800 CL40 after installation?

Enter the BIOS or use a hardware-inventory tool such as dmidecode. Verify all 16 slots show 96GB 2Rx4 Registered ECC RDIMMs, speed reads 4800 MT/s (PC5-38400), voltage 1.1V, and CAS latency 40 with zero correctable errors logged.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.