Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 4800 CL40 2Rx4 ECC RDIMM memory upgrade

SKU CH-S1WC-C6HGT

A 128 GB DDR5 ECC registered kit with two 64 GB modules running at 4800 MT/s CL40 for compatible Supermicro servers

  • Capacity128GB (2 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB DDR5 capacity for high-density server workloads
  • 2 x 64 GB dual-rank modules with ECC for data integrity
  • 4800 MT/s CL40 speed matching PC5-38400 spec
  • 1 V operating voltage for efficient registered DIMM power
  • Validated for Supermicro X13SEM-F and SYS-211E systems

SuperMicro DDR5 4800 ECC RDIMM kit

This 128GB kit contains two 64GB DDR5 4800 registered DIMMs built for SuperMicro servers and workstations. Each module runs at 1.10V with CL40 latency and 2Rx4 organisation. ECC and register buffering protect data integrity in mission-critical workloads.

Installation and common issues

The 288-pin DDR5 RDIMMs install in minutes by seating them in the correct DIMM slots per the system manual. Ensure the motherboard firmware supports DDR5 4800 registered ECC before adding the kit. Mixing ranks or voltages can prevent boot.

Suitable buyers and mismatched needs

IT teams running SuperMicro X13SEM-F or X13SEM-TF platforms that require registered ECC memory at 4800 MT/s will benefit. Builders needing unbuffered UDIMMs, non-ECC modules, or speeds above 4800 should look at other product lines.

Istaknuto

  • 128 GB DDR5 capacity for high-density server workloads
  • 2 x 64 GB dual-rank modules with ECC for data integrity
  • 4800 MT/s CL40 speed matching PC5-38400 spec
  • 1 V operating voltage for efficient registered DIMM power
  • Validated for Supermicro X13SEM-F and SYS-211E systems

Specifikacije

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K2
Capacity128GB (2 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Pitanja o ovom artiklu

How can I confirm the kit is running at DDR5 4800 with CL40 timings after installation?

Check the memory speed and CAS latency in the server BIOS or a hardware monitoring tool; the modules should report 4800 MT/s and CL40 when operating as specified.

What comes in the package and do I need any extra parts for a SuperMicro X13SEM-F or X13SEM-TF?

The box contains the 128 GB kit as two 64 GB 288-pin DDR5 RDIMMs; no additional components are required for the listed SuperMicro systems.

Should I choose the 2Rx4 registered ECC version or a different rank configuration for my SuperServer?

Select this 2Rx4 registered ECC kit; it matches the memory specification validated for the compatible SuperMicro platforms.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.