NEMIX RAM
NEMIX RAM 256GB (8x32GB) DDR4 3200 ECC RDIMM 2Rx8 THINKMATE XF4-24S3 memory upgrade
256GB kit of eight 32GB DDR4 3200 ECC registered DIMMs for THINKMATE XF4-24S3 workstations
- Capacity256GB (8 x 32GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 256 GB total capacity across eight 32 GB modules
- DDR4 3200 speed rated at PC4-25600 for high throughput
- ECC registered RDIMM design detects and corrects data errors
- 2Rx8 dual-rank organisation with CL22 latency at 1.20 V
- Built with major OEM Samsung Micron Hynix chips for reliability
256 GB DDR4 ECC RDIMM kit
This NEMIX RAM kit supplies 256 GB of DDR4 3200 ECC registered memory in eight 32 GB modules. It is built for ThinkMate XF4-24S3 workstations and servers that require registered DIMMs with error correction. The modules run at 1.2 V with CL22 latency and use a 2Rx8 organisation. They are intended for IT professionals who need validated capacity upgrades in compatible ThinkMate systems.
Suited for ThinkMate XF4-24S3 upgrades
This kit suits administrators expanding a ThinkMate XF4-24S3 to its supported memory limit with registered ECC modules. It is not for desktop boards that accept only unbuffered non-ECC DIMMs, nor for laptops or small-form-factor systems that use SO-DIMMs. Buyers who need a different capacity, speed or form factor should look at other NEMIX RAM configurations matched to their specific platform.
Steady throughput under sustained load
Each module is stress-tested under load to confirm stability during extended server workloads such as virtualisation, database hosting or rendering queues. Registered buffering and ECC maintain data integrity when all eight slots are populated and the memory controller runs continuously at 3200 MT/s. The 1.2 V operating voltage keeps power draw consistent across long-duration tasks without thermal throttling.
Istaknuto
- 256 GB total capacity across eight 32 GB modules
- DDR4 3200 speed rated at PC4-25600 for high throughput
- ECC registered RDIMM design detects and corrects data errors
- 2Rx8 dual-rank organisation with CL22 latency at 1.20 V
- Built with major OEM Samsung Micron Hynix chips for reliability
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-328K8 |
| Capacity | 256GB (8 x 32GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 256GB (8X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
Pitanja o ovom artiklu
Must the ThinkMate XF4-24S3 workstation have 288-pin DDR4 RDIMM slots available to accept this 256GB kit?
Yes, each of the eight 32GB modules uses the 288-pin DDR4 RDIMM form factor, so the system needs eight free registered DIMM slots.
Will the registered ECC modules operate correctly if mixed with unbuffered non-ECC DIMMs already installed in the same server?
No, registered ECC RDIMMs cannot be mixed with unbuffered or non-ECC memory; all populated slots must use matching registered ECC modules.
After installation, how can I verify the kit is running at the rated 3200 MT/s with CL22 timings?
Check the BIOS memory information or use a tool such as CPU-Z to confirm the operating speed shows DDR4-3200 and CAS latency reads CL22.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.



