Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green SODIMM sticks with black chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR4 2933MHz CL21 260-pin SODIMM memory upgrade

SKU CH-9J0Z-QVDAP

A 32 GB DDR4 SODIMM kit built with major OEM chips and tested for Supermicro X12SCV motherboards

  • Capacity32GB (2 x 16GB)
  • Type260-Pin DDR4 SODIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 32GB 2X16GB

  • Exact DDR4-2933 CL21 1.20V spec matches Supermicro X12SCV memory controller
  • 32GB dual-channel kit (2×16GB) 1Rx8 rank optimised for board population rules
  • 260-pin SODIMM form factor fits laptop slot, not desktop UDIMM
  • Built with Samsung Micron Hynix OEM chips tested at rated speed voltage
  • Lifetime replacement warranty with US-based technical support included

Exact-match DDR4 SODIMM kit

This 32 GB kit contains two 16 GB DDR4-2933 SODIMM modules built to the PC4-23400 specification. It is designed for the Supermicro X12SCV-W and X12SCV-LVDS motherboards that require 260-pin unbuffered non-ECC memory. The 1Rx8 rank organisation and CL21 latency match the platform's memory controller expectations.

Low-voltage operation

Each module runs at 1.2 V, the standard voltage for DDR4 SODIMM parts, so power draw stays within the laptop's thermal envelope. Without a heat spreader the sticks rely on the chassis airflow that the Supermicro boards already provide. The major OEM Samsung, Micron or Hynix chips are validated for stability at the rated speed and timing.

Two-slot population

The kit fills two SODIMM slots and delivers 32 GB total capacity, leaving any additional slots free for future expansion if the motherboard supports more than two modules. Buyers who need ECC, registered DIMMs or a different pin count cannot use this product. Verify the system manual for approved population order before installation.

Istaknuto

  • Exact DDR4-2933 CL21 1.20V spec matches Supermicro X12SCV memory controller
  • 32GB dual-channel kit (2×16GB) 1Rx8 rank optimised for board population rules
  • 260-pin SODIMM form factor fits laptop slot, not desktop UDIMM
  • Built with Samsung Micron Hynix OEM chips tested at rated speed voltage
  • Lifetime replacement warranty with US-based technical support included

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered SODIMM Memory
Part NumberMS23400-618K2
Capacity32GB (2 x 16GB)
Type260-Pin DDR4 SODIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB 2X16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 260-PIN Non-ECC SODIMM KIT

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How do I install the 260-pin SODIMM modules on the Supermicro X12SCV-W motherboard, and what step is often missed?

Align the notch on each 260-pin module with the slot key, insert at an angle, then press down until the side clips click. The step often missed is checking the manual for the correct population order so both 16 GB modules are recognised at full 32 GB capacity.

What maintenance or replacement will the 1Rx8 DDR4 kit need over time?

No routine maintenance is required for the non-ECC unbuffered modules. If a module fails, the lifetime replacement warranty covers a direct swap; otherwise the kit runs at 1.2 V with no user-serviceable parts.

What limit appears first when the memory runs at 2933 MHz under sustained load?

The CL21 CAS latency at 1.20 V is the primary timing constraint. Under continuous heavy workloads the controller cannot exceed the rated 2933 MHz speed, so latency remains fixed at CL21 rather than scaling higher.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.