Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green DDR5 UDIMM modules, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 ECC UDIMM Supermicro X14SAZ-TLN4F memory upgrade

SKU CH-DHE0-KH6EQ

A 32GB dual-channel DDR5-5600 ECC UDIMM kit with CL46 timing and 1.1V operation, validated for the Supermicro X14SAZ-TLN4F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

  • ECC corrects single-bit errors automatically protecting data integrity
  • 32 GB kit (2 x 16 GB) expands Supermicro X14SAZ-TLN4F memory capacity
  • DDR5 5600 speed matches board specification for full rated performance
  • CL46 1.1 V 1Rx8 timing ensures controller recognition at rated speed
  • 288-pin unbuffered UDIMM form factor fits required motherboard slots

Exact DDR5 ECC UDIMM upgrade

This 32 GB kit contains two 16 GB unbuffered ECC modules built to the DDR5 5600 standard. It is intended for administrators and integrators who need to expand a Supermicro X14SAZ-TLN4F motherboard with memory that matches the board's native specifications.

DDR5 5600 CL46 1Rx8 at 1.1 V

The single decisive specification is the DDR5 5600 speed grade with CL46 latency, 1Rx8 organisation and 1.1 V operating voltage. These values align with the memory controller expectations of the target motherboard so the kit is recognised at full capacity and rated frequency.

Sustained error-correcting operation

ECC circuitry detects and corrects single-bit errors continuously during long compute runs, preventing silent data corruption that can accumulate under sustained load. The unbuffered design keeps latency low while the 288-pin UDIMM form factor fits the board's DIMM slots without requiring registered or SODIMM alternatives.

Istaknuto

  • ECC corrects single-bit errors automatically protecting data integrity
  • 32 GB kit (2 x 16 GB) expands Supermicro X14SAZ-TLN4F memory capacity
  • DDR5 5600 speed matches board specification for full rated performance
  • CL46 1.1 V 1Rx8 timing ensures controller recognition at rated speed
  • 288-pin unbuffered UDIMM form factor fits required motherboard slots

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Will the 5600 MT/s rating run at that speed on the Supermicro X14SAZ-TLN4F?

The kit is spec-matched to the board's DDR5 5600 controller, so it will be recognised at the rated 5600 MT/s without manual tuning.

What does the PC5-44800 label cap in real use?

PC5-44800 is the peak transfer rate for DDR5 5600; the board's memory controller limits actual throughput to that ceiling.

Does the 288-pin UDIMM form factor fit the X14SAZ-TLN4F DIMM slots?

Yes, the board requires 288-pin unbuffered ECC UDIMMs and this kit matches that exact form factor.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.