BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00276732BTC
Na zalihi
NEMIX RAM
NEMIX RAM 32GB (4x8GB) DDR4 3200 CL22 UDIMM ASRock TRX40 Taichi memory upgrade
A 32 GB kit of four 8 GB DDR4 3200 CL22 unbuffered UDIMM modules at 1.2 V, validated for ASRock TRX40 Taichi motherboards
- Capacity32GB (4 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32 GB kit expands desktop capacity for heavy multitasking
- DDR4 3200 speed matches ASRock TRX40 Taichi spec for stable operation
- CL22 latency and 1.2 V voltage keep power draw low
- 4 × 8 GB unbuffered UDIMM layout fills four DIMM slots evenly
- Tested with Samsung, Micron or Hynix chips for reliable compatibility
ASRock TRX40 Taichi 32GB Kit
This 32GB kit contains four 8GB DDR4 UDIMM modules validated for the ASRock TRX40 Taichi motherboard. It targets builders and IT professionals who need a matched, tested set for workstation or server workloads. The modules are unbuffered and non-ECC, suited to standard desktop platforms rather than registered-memory servers.
DDR4 3200 CL22 Capacity
Running at 3200MT/s with CL22 latency and 1.2V, the kit delivers 32GB total across four ranks of 1Rx8 Samsung, Micron or Hynix chips. It handles multi-threaded applications and virtualisation guests comfortably until the four-slot limit is reached; beyond that the platform requires higher-density or registered DIMMs.
No Heat Spreader Included
The package supplies only the four bare UDIMM sticks with no heatsinks, thermal pads or software utilities. Builders with restricted airflow should plan their own cooling, while those needing monitoring tools must rely on motherboard firmware or third-party utilities.
Istaknuto
- 32 GB kit expands desktop capacity for heavy multitasking
- DDR4 3200 speed matches ASRock TRX40 Taichi spec for stable operation
- CL22 latency and 1.2 V voltage keep power draw low
- 4 × 8 GB unbuffered UDIMM layout fills four DIMM slots evenly
- Tested with Samsung, Micron or Hynix chips for reliable compatibility
Specifikacije
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Gaming Motherboard Compatible Series Memory |
| Model | ASRock DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (4X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Pitanja o ovom artiklu
Will the 3200 MHz CL22 modules run at their rated speed alongside my existing DDR4 memory on the ASRock TRX40 Taichi?
The kit is validated for the ASRock TRX40 Taichi at DDR4 3200 CL22 1.20 V. When mixed with slower DDR4, the motherboard will typically downclock all modules to the lowest common speed and loosest timings.
How can I verify the 4 x 8 GB kit is operating at DDR4 3200 CL22 after installation?
Enter the UEFI on the ASRock TRX40 Taichi and confirm the memory frequency reads 3200 MT/s with CAS latency 22. CPU-Z or HWiNFO in Windows will show the same figures under the SPD and Memory tabs.
Does the MD25600-818K4 package include a heat spreader or any cables, or must I buy them separately?
The modules ship without a heat spreader. The box contains only the four 288-pin UDIMMs; no cables, screws or additional accessories are included.
Također u ovoj kategoriji
Kupci su usporedili ovo
Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00279306BTC
Na zalihi
