Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava

NEMIX RAM

NEMIX RAM 4GB (2x2GB) DDR3 1333 PC3-10600 1.5V 240-Pin UDIMM desktop RAM

SKU CH-3NWZ-5QJ7D

A 4 GB DDR3 kit with two 2 GB unbuffered modules running at 1333 MHz and CL9 latency

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 4GB (2 x 2GB)

  • Dual-channel 4 GB kit runs at DDR3 1333
  • CL9 latency supports responsive desktop multitasking
  • 50 V standard voltage ensures broad motherboard compatibility
  • Unbuffered non-ECC 240-pin UDIMM fits typical desktop slots
  • Modules built with major-brand Samsung, Micron or Hynix chips

DDR3 1333 kit for desktop upgrades

This NEMIX RAM kit supplies 4 GB across two 2 GB UDIMM modules built to the DDR3 1333 (PC3-10600) standard. It targets owners of older desktop boards that accept 240-pin unbuffered non-ECC memory at 1.5 V. The matched pair enables dual-channel operation on compatible platforms.

Capacity and headroom at 4 GB total

Four gigabytes covers everyday office applications, web browsing and light multitasking on legacy systems. Memory-intensive workloads such as modern gaming, video editing or virtual machines will exhaust the available space quickly. The CL9 latency and 1333 MT/s rate match the platform’s native ceiling.

Thermals noise and power at 1.5 V

Modules run at the standard 1.50 V without heat spreaders, relying on case airflow for cooling. Power draw stays low, consistent with DDR3 UDIMM specifications. Silent operation is assured because no active cooling is present on the sticks.

Istaknuto

  • Dual-channel 4 GB kit runs at DDR3 1333
  • CL9 latency supports responsive desktop multitasking
  • 50 V standard voltage ensures broad motherboard compatibility
  • Unbuffered non-ECC 240-pin UDIMM fits typical desktop slots
  • Modules built with major-brand Samsung, Micron or Hynix chips

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-228K2
Capacity4GB (2 x 2GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Will these two 2 GB DDR3 1333 modules run together with my existing DDR3 1333 sticks?

Yes, both are DDR3 1333 (PC3-10600) CL9 1.5 V unbuffered non-ECC UDIMMs, so they share the same speed, voltage and timing baseline.

How can I verify the kit is running at DDR3 1333 CL9 1.5 V after I install it?

Open the BIOS or a utility such as CPU-Z and check that the memory frequency shows 1333 MT/s with CL9 timings at 1.5 V.

What comes in the MD10600-228K2 box and do I need anything extra to install it?

The kit contains two 2 GB 240-pin DDR3 UDIMM modules; no heat spreaders, cables or tools are included and none are required for a standard desktop DIMM slot.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.