Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 576GB (6x96GB) DDR5 4800 CL40 2Rx4 ECC Registered RDIMM Kit for GIGABYTE MZ33-CP1 memory upgrade

SKU CH-VHH0-821F9

A 576 GB DDR5 4800 CL40 registered ECC RDIMM kit of six 96 GB 2Rx4 modules built for the GIGABYTE MZ33-CP1 server motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Prikaži još 18 konfiguracija
  • 576GB total capacity from six 96GB modules for high-density server workloads
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth for GIGABYTE MZ33-CP1
  • Registered ECC design corrects single-bit errors and supports full-slot population
  • 10V operation at 2Rx4 rank matches the motherboard's memory-controller requirements
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the target platform

576GB DDR5 ECC RDIMM kit for GIGABYTE MZ33-CP1

This 576GB kit contains six 96GB DDR5 4800 CL40 registered ECC RDIMMs built for the GIGABYTE MZ33-CP1 motherboard. It targets server administrators who need maximum memory capacity on this specific platform. The 2Rx4 registered architecture matches the board's memory-controller requirements exactly. Buyers who need unbuffered UDIMMs or SODIMMs should look elsewhere.

Capacity headroom with six 96GB modules

Six 96GB modules fill every slot on the MZ33-CP1 for a total of 576GB, letting large databases, virtualization hosts and analytics workloads run entirely in memory. The registered design keeps all slots stable at full population. Systems limited to fewer DIMM slots or lower per-module density cannot reach this capacity with this kit.

Registered ECC build with 288-pin DDR5 interface

Each module uses a 288-pin DDR5 RDIMM form factor without a heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller while ECC corrects single-bit errors automatically. The 1.10V operating voltage matches the platform spec. Installers must follow the motherboard manual for correct population order.

Istaknuto

  • 576GB total capacity from six 96GB modules for high-density server workloads
  • DDR5-4800 speed with CL40 latency delivers rated bandwidth for GIGABYTE MZ33-CP1
  • Registered ECC design corrects single-bit errors and supports full-slot population
  • 10V operation at 2Rx4 rank matches the motherboard's memory-controller requirements
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the target platform

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Will the 6x96GB DDR5 4800 CL40 RDIMM kit run at full speed alongside existing DDR5 4800 modules in the GIGABYTE MZ33-CP1?

Yes, the kit matches the board's DDR5 4800 PC5-38400 spec, 1.10 V voltage, CL40 timing and 2Rx4 registered ECC layout, so mixed populations that follow the manual's slot order will operate at the rated 4800 MT/s.

How can I confirm the 576 GB kit is detected and running at DDR5 4800 with ECC active after installation?

Enter the BIOS or UEFI and verify total memory shows 576 GB, speed reads 4800 MT/s (PC5-38400), and ECC status is reported as enabled or active for each DIMM slot.

Does the MR38400-9624K6 box contain only the six 96 GB RDIMMs or are cables, brackets or a heat spreader included?

The package contains only the six 96 GB 288-pin DDR5 4800 CL40 2Rx4 registered ECC RDIMMs; no heat spreaders, cables or mounting hardware are supplied.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.