Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Four green circuit boards with black memory chips and gold contacts lying side by side

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 2933MHz CL21 1.2V UDIMM memory upgrade

SKU CH-EJH5-FH5QW

64 GB DDR4 2933 MHz kit in four 16 GB UDIMM modules tuned for Supermicro X12SAE and X12SCA-F boards

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 64GB 4X16GB

  • 64GB total capacity in a 4×16GB kit for high-density desktop upgrades
  • DDR4 2933MHz CL21 1.2V timing matches your memory controller exactly
  • 288-pin unbuffered UDIMM form factor fits Supermicro X12SAE and X12SCA-F boards
  • Built with Samsung Micron or Hynix chips tested at rated speed and voltage
  • Lifetime replacement warranty with US-based technical support included

64GB DDR4 2933 kit for Supermicro boards

This NEMIX RAM kit delivers 64GB of DDR4 memory across four 16GB unbuffered UDIMM modules rated at 2933MHz CL21 and 1.2V. It is built to the exact rank, voltage and timing the supported Supermicro X12SAE and X12SCA-F motherboards expect for full-capacity recognition. The 288-pin non-ECC design matches the desktop UDIMM form factor those boards require.

Suited for verified Supermicro upgrades.

Builders upgrading a compatible Supermicro X12SAE or X12SCA-F system can install this kit with confidence that the memory controller will recognise every module at its rated speed. Buyers who need ECC error correction, registered modules or laptop SODIMM form factors should look elsewhere, as this kit provides none of those features.

Four ranks of 16GB handle multitasking.

The four single-rank 16GB modules give 64GB total capacity, which comfortably runs typical desktop workloads, virtual machines and large datasets within the board's supported limits. Systems requiring more than 64GB or faster speeds than 2933MHz will exceed what this specific kit and the validated motherboards can provide.

Istaknuto

  • 64GB total capacity in a 4×16GB kit for high-density desktop upgrades
  • DDR4 2933MHz CL21 1.2V timing matches your memory controller exactly
  • 288-pin unbuffered UDIMM form factor fits Supermicro X12SAE and X12SCA-F boards
  • Built with Samsung Micron or Hynix chips tested at rated speed and voltage
  • Lifetime replacement warranty with US-based technical support included

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Do I need a Supermicro X12SAE or X12SCA-F motherboard with four free 288-pin DDR4 UDIMM slots for this 64 GB kit to work?

Yes, the kit is validated for those two Supermicro boards and requires four available 288-pin UDIMM slots to install all four 16 GB modules.

Can I keep existing DDR4 UDIMM modules installed while adding this 4×16 GB kit to the same board?

The motherboard manual defines the approved population order; mixing ranks or speeds may force the system to run at the lowest common timing.

How do I confirm the 64 GB kit is running at DDR4-2933 CL21 after installation?

Check the BIOS memory information or a system utility such as CPU-Z to verify 2933 MT/s speed, CL21 latency, 1.20 V voltage and full 64 GB capacity.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.