Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green circuit board with black chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX ZT-3115 memory upgrade

SKU CH-3MQR-A2AX0

8 GB DDR4 3200 SODIMM with CL22 timing and 1.2 V operation, built for the POSIFLEX ZT-3115 terminal

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX ZT-3115 terminals
  • 8GB DDR4 3200MHz boosts system speed
  • CL22 latency at 1.20V efficient power
  • 260-pin SODIMM fits POS kiosk slots
  • Major OEM chips ensure reliable operation

8GB DDR4 3200 SODIMM for POSIFLEX ZT-3115

This NEMIX RAM module is an 8GB DDR4 3200 CL22 260-pin SODIMM built for the POSIFLEX ZT-3115 Haydn ZT Series point-of-sale terminal. It runs at 1.20V as a non-ECC unbuffered 2Rx8 stick using Samsung Micron or Hynix components. The part number is MS25600-828K1.

Fits the ZT-3115 terminal only.

This upgrade suits technicians maintaining or expanding the specified POSIFLEX terminal. It will not fit desktops laptops or other POS models that require different pin counts voltages or form factors. Buyers needing ECC registered memory or a different capacity should look elsewhere.

8GB capacity handles typical POS workloads

The single 8GB stick covers standard transaction processing and multi-tasking in the target terminal. Headroom ends when the application set demands more than 8GB of addressable memory or when the board requires a higher speed grade or lower latency than CL22.

Istaknuto

  • Designed for POSIFLEX ZT-3115 terminals
  • 8GB DDR4 3200MHz boosts system speed
  • CL22 latency at 1.20V efficient power
  • 260-pin SODIMM fits POS kiosk slots
  • Major OEM chips ensure reliable operation

Specifikacije

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Pitanja o ovom artiklu

Does the POSIFLEX ZT-3115 need an open 260-pin DDR4 SODIMM slot for this module?

Yes, the upgrade is a 260-pin DDR4 SODIMM and requires one free SODIMM socket in the terminal.

Will this CL22 1.20 V DDR4 3200 stick run stably beside slower DDR4 modules already in the ZT-3115?

The module operates at 1.20 V with CL22 timing; the system will clock all installed memory to the slowest common speed and latency.

How can I confirm the 8 GB module is recognised at 3200 MT/s after installation?

Check the BIOS memory summary or the OS task manager — both should report 8 GB running at 3200 MT/s (PC4-25600).

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.