Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green printed circuit board SODIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM CSE-E102TF2 8GB DDR5 4800 CL40 1Rx8 1.1V 262-pin SODIMM memory upgrade

SKU CH-AYNG-88T2B MPN CSE-E102TF2

8 GB DDR5 SODIMM running at 4800 MHz CL40, built for Supermicro SYS-E102-13R-H servers

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 8 GB capacity expands multitasking headroom in compact servers
  • DDR5 4800 speed delivers 38400 MB/s bandwidth for data-intensive workloads
  • 1 V operation reduces power draw and thermal load
  • 262-pin SODIMM form factor fits SuperMicro SYS-E102-13R-H chassis
  • CL40 latency ensures responsive performance for edge applications

8 GB DDR5 SODIMM for SuperMicro SYS-E102

This NEMIX RAM module provides 8 GB of DDR5 memory in a 262-pin SODIMM form factor. It is validated for the SuperMicro IoT SuperServer SYS-E102-13R-H and the Super X13SRN-H-WOHS motherboard. The kit contains a single unbuffered non-ECC stick rated at 4800 MT/s.

Suited for single-slot upgrades on the listed

Administrators expanding a SuperMicro SYS-E102 or X13SRN-H-WOHS system with one additional SODIMM will find this part a direct fit. Builders needing ECC protection, registered modules, higher capacities per slot, or compatibility with other server platforms should select a different module.

PC5-38400 speed grade at CL40 latency

The module operates at the DDR5 4800 standard with a CAS latency of 40 cycles. This specific data rate and timing determine whether the memory matches the motherboard's qualified vendor list and keeps the system stable under load.

Istaknuto

  • 8 GB capacity expands multitasking headroom in compact servers
  • DDR5 4800 speed delivers 38400 MB/s bandwidth for data-intensive workloads
  • 1 V operation reduces power draw and thermal load
  • 262-pin SODIMM form factor fits SuperMicro SYS-E102-13R-H chassis
  • CL40 latency ensures responsive performance for edge applications

Specifikacije

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-818K1
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 262-PIN Non-ECC Unbuffered SODIMM

Pitanja o ovom artiklu

Will this 262-pin SODIMM fit the SO-DIMM slot on my Supermicro SYS-E102-13R-H?

Yes. The module is a 262-pin DDR5 SODIMM built for the Supermicro IoT SuperServer SYS-E102-13R-H and the X13SRN-H-WOHS motherboard.

What is the correct way to seat the module so the 1Rx8 rank is recognised at 4800 MT/s?

Align the notch with the slot key, insert at a slight angle, then press down firmly until both side clips click — partial insertion is the common mistake.

Does the lack of a heat spreader mean I must add cooling or replace the stick sooner?

No. The 1.1 V DDR5 SODIMM runs within JEDEC thermal limits without a spreader; no extra cooling or scheduled replacement is required.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.