Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 768GB 16x48GB ECC RDIMM Supermicro H13SSF memory upgrade

SKU CH-SP4W-A19RY

A 768GB kit of sixteen 48GB DDR5 5600 ECC registered RDIMMs at CL46 and 1.1V, validated for Supermicro H13SSF motherboards

  • Capacity768GB (16 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 768 GB total capacity from sixteen 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency runs at rated frequency on the H13SSF
  • Registered ECC architecture with 2Rx8 organisation offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement for stable full-population loads
  • 288-pin RDIMM form factor fits the Supermicro H13SSF memory slots exactly

Exact-fit DDR5-5600 kit for Supermicro H13SSF

This NEMIX RAM kit delivers 768 GB across 16 modules of 48 GB each. Registered ECC DDR5-5600 RDIMMs run at 1.1 V with CL46 timing, matching the memory controller expectations of the Supermicro H13SSF motherboard. The 2Rx8 organization and 288-pin form factor ensure full-capacity recognition at rated speed. It is built for servers that require registered error-correcting memory in a validated population.

Registered ECC architecture for full-slot stability

Registered buffering offloads the memory controller so every slot can run fully populated at the rated 5600 MT/s. On-die ECC detects and corrects single-bit errors in flight, preventing silent data corruption and unplanned reboots in production workloads. The kit uses major OEM DRAM from Samsung, Micron, or Hynix without heat spreaders, fitting standard DIMM clearance. Installers must follow the motherboard manual for approved population order and maximum supported capacity per channel.

Replaces smaller or slower DDR5 RDIMM sets

This kit upgrades systems currently running lower-capacity DDR5 registered modules or mixed-rank configurations that limit total memory or force reduced speeds. The jump is worth it when workloads demand the full 768 GB at DDR5-5600 without downclocking. It is not for platforms that accept only unbuffered UDIMMs, SODIMMs, or earlier DDR generations.

Istaknuto

  • 768 GB total capacity from sixteen 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency runs at rated frequency on the H13SSF
  • Registered ECC architecture with 2Rx8 organisation offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement for stable full-population loads
  • 288-pin RDIMM form factor fits the Supermicro H13SSF memory slots exactly

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K16
Capacity768GB (16 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 16X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Pitanja o ovom artiklu

What is the voltage and CAS latency that define the power and timing limits of these DDR5 5600 RDIMMs under sustained load?

The kit runs at 1.10V with a CL46 latency, the exact voltage and timing the memory controller expects for stable operation at full capacity.

How do the registered ECC design and 1.10V voltage affect heat and noise when all 16 slots are populated continuously?

Registered buffering reduces electrical load on the controller and the low 1.10V operation keeps power draw modest, so the modules add minimal heat and no audible noise of their own.

Which motherboard and form factor must already be installed for this 288-pin RDIMM kit to function?

A Supermicro H13SSF motherboard with 16 available 288-pin DDR5 RDIMM slots is required; the modules will not fit UDIMM or SODIMM sockets.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.