Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green circuit boards with black memory chips and gold edge connectors lying side by side

NEMIX RAM

NEMIX RAM DDR5 5600 ECC SODIMM 32GB 2x16GB CL46 1.1V 262-pin memory upgrade

SKU CH-RXJB-585W1

A 32GB dual-channel DDR5 kit with ECC error correction, 5600MHz speed, CL46 latency, 1.1V operation and 262-pin SODIMM form factor for compatible Supermicro systems

  • Capacity32GB (2 x 16GB)
  • Type262-Pin DDR5 ECC SODIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

  • 32 GB capacity from two 16 GB modules expands system memory for demanding workloads
  • DDR5 5600 speed delivers high bandwidth for data-intensive applications
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • CL46 latency at 1.1 V balances responsive timing with efficient power use
  • 262-pin unbuffered SODIMM form factor fits Supermicro X14SAV-LVDS motherboard slots

Exact-fit upgrade for Supermicro X14SAV-LVDS

This 32GB kit delivers two 16GB DDR5 5600 ECC SODIMM modules built to the precise 1Rx8 unbuffered specification your system expects. The 262-pin form factor matches the motherboard slots exactly, so the memory controller recognises the full capacity at rated speed without manual tuning.

Thermals noise and power draw

Operating at 1.1V, the modules draw minimal power and run without heat spreaders, keeping thermals low in the dense SODIMM layout. Silent passive cooling means no added fan noise, and the low voltage reduces stress on the motherboard power phases during sustained workloads.

Build integration and trade-offs

The kit plugs directly into the Supermicro X14SAV-LVDS SODIMM slots, freeing full-size DIMM bays for other configurations while delivering error-correcting reliability. Buyers who need registered DIMMs, higher capacities per module, or non-ECC memory for consumer boards cannot use this kit.

Istaknuto

  • 32 GB capacity from two 16 GB modules expands system memory for demanding workloads
  • DDR5 5600 speed delivers high bandwidth for data-intensive applications
  • ECC protection detects and corrects single-bit errors to prevent data corruption
  • CL46 latency at 1.1 V balances responsive timing with efficient power use
  • 262-pin unbuffered SODIMM form factor fits Supermicro X14SAV-LVDS motherboard slots

Specifikacije

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered SODIMM Memory
Part NumberMSE44800-618K2
Capacity32GB (2 x 16GB)
Type262-Pin DDR5 ECC SODIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 262-PIN ECC SODIMM KIT

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

How do I install the 262-pin DDR5 SODIMM modules and what step is often missed?

Align the notch on each 262-pin DDR5 SODIMM with the slot key, press firmly until both side clips click, then verify in BIOS that both 16 GB modules are detected at 5600 MT/s with ECC enabled.

What maintenance or replacement will this 32 GB DDR5 ECC kit need over time?

No routine maintenance is required; the modules have no heat spreader and run at 1.1 V, so replacement is only needed if a module fails or the system later demands more than 32 GB total capacity.

What limit appears first when this DDR5 5600 CL46 kit runs sustained workloads?

The CAS latency of CL46 at 5600 MT/s sets the timing floor; sustained heavy use will hit this latency boundary before voltage or thermal limits become a factor.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.