Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black 120mm square case fan with 25mm depth and two-pin power connector

OEM Industries

OEM Industries MWP1225L12S 120mm CPU cooler

SKU CH-RRXF-KWSBD MPN MWP1225L12S

A 120 mm sleeve-bearing case fan running at 12 V and 0.4 A with a two-pin connector

  • ColorBlack
  • TypeFan only
  • Fan Size120mm
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • 120 mm fan fits standard case mounts
  • 12 V / .4 A power draw keeps cable load low
  • sleeve bearing runs quietly at low speed
  • 25 mm thickness clears most CPU coolers
  • 2-pin connector works with any motherboard header

120 mm sleeve-bearing case fan

The MWP1225L12S is a 120 mm fan with a sleeve bearing and a two-pin power connector. It runs on 12 V at 0.4 A and has no LED lighting. The black frame measures 120 by 120 by 25 mm. It suits builders who need a basic airflow device for a standard mounting pattern.

Continuous low-speed airflow

Under sustained load the sleeve bearing delivers steady rotation at the rated voltage and current. The two-pin design means speed stays constant without PWM control. Acoustic output remains consistent during long sessions because there is no speed ramping. The fan is intended for case ventilation rather than high-static-pressure heatsink duty.

Check mounting holes and header type

Verify that your chassis has 120 mm mounting points spaced for a 25 mm thick frame. Confirm the motherboard or fan controller provides a two-pin header; a four-pin PWM header will run the fan at full speed only. No adapter or additional wiring is included in the package.

Istaknuto

  • 120 mm fan fits standard case mounts
  • 12 V / .4 A power draw keeps cable load low
  • sleeve bearing runs quietly at low speed
  • 25 mm thickness clears most CPU coolers
  • 2-pin connector works with any motherboard header

Specifikacije

ModelMWP1225L12S
ColorBlack
TypeFan only
Fan Size120mm
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Pitanja o ovom artiklu

How much noise and power does the 120mm 0.4A sleeve-bearing fan produce when running continuously?

The 120mm sleeve-bearing fan draws 0.4A at 12V, so sustained operation stays at modest power levels; sleeve bearings typically run quieter at low speeds but can grow louder as lubricant ages.

What motherboard header or adapter is needed to run this 2-pin 12V fan?

It connects directly to any standard 2-pin 12V fan header; if the board only offers 3-pin or 4-pin headers, the 2-pin plug fits the outer two pins and will run at full voltage.

Will the 120×120×25mm frame clear the RAM slots and older tower coolers in a legacy build?

At 25mm thick the fan matches the classic 12025 form factor, so it fits the same mounting holes and clearance envelope as most older 120mm case or heatsink fans.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.