Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Black USB 3.0 to SATA adapter cable with Type-C power port

Orico

Orico 0.5m USB 3.0 to SATA hard drive adapter

SKU CH-SBRF-Q5G93 MPN 0.5m

Connects a 2.5 inch SATA drive via USB 3.0 with UASP up to 5Gbps, includes Type-C power port for 6TB drives, plug-and-play on Windows, Linux, Mac and Android

  • Changer TypeUSB 2.0 to SATA

Changer Type USB 2.0 to SATA

Model 0.5m

Option 2.5in HDD/SSD

  • Connects 2.5″ SATA drives via USB 3.0
  • UASP protocol reaches 480M/s test speed
  • Transfers 1 GB in about three seconds
  • Type-C 5V port powers drives up to 6 TB
  • Driver-free on Windows, Linux, Mac OS, Android

Adapter for 2.5-inch SATA drives

The Orico 0.5m USB 3.0 to SATA adapter connects a 2.5-inch SATA hard drive or solid-state drive to a USB port on a computer. It is intended for users who need to access data from a bare drive without installing it inside a chassis. The short cable keeps the setup compact on a desk or in a laptop bag.

Type-C power port and UASP support

A reserved Type-C 5V power supply port lets the adapter drive larger capacity disks up to 6TB when extra power is needed. USB 3.0 to SATA 3.0 with UASP protocol enables theoretical speeds up to 5Gbps, and the supplier test speed can reach 480M/s for faster file transfers. Drive-free plug-and-play operation works across Windows, Linux, Mac OS and Android without additional software.

Short cable and direct drive connection

The 0.5m length reduces cable clutter and signal loss while keeping the drive close to the host device. A standard SATA connector mates directly with the drive’s data and power pins, so no separate enclosure or mounting hardware is required. This design suits quick diagnostic tasks, data recovery or temporary external storage where a permanent case is unnecessary.

Istaknuto

  • Connects 2.5″ SATA drives via USB 3.0
  • UASP protocol reaches 480M/s test speed
  • Transfers 1 GB in about three seconds
  • Type-C 5V port powers drives up to 6 TB
  • Driver-free on Windows, Linux, Mac OS, Android

Specifikacije

Changer TypeUSB 2.0 to SATA

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Will the Type-C 5V power port need a separate adapter to run a 6TB drive?

The port is reserved for a 5V supply; you can plug any standard USB-C charger into it when a 6TB drive needs extra current.

What throughput ceiling appears first during long transfers?

The USB 3.0 link caps sustained throughput at 5Gbps, and real-world tests show about 480M/s.

Does the cable get hot or draw much power when left plugged in all day?

It draws only the 5V supply needed for the attached drive and stays cool because there are no active electronics beyond the bridge chip.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.