Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Rectangular M.2 2280 circuit board with graphene cover and cooling vest

Orico

Orico e3500-1TB 1TB M.2 2280 NVMe internal SSD

SKU CH-9ZX4-N0Y3E MPN e3500-1TB

M.2 2280 NVMe drive with 1 TB of 3D NAND QLC storage, PCIe Gen3 x4 interface, graphene cooling vest and speeds up to 3500 MB/s read and 2800 MB/s write

  • Device TypeInternal Solid State Drive (SSD)
  • Form FactorM.2 2280
  • Capacity1TB
  • Memory Components3D NAND
  • InterfacePCIe NVMe Gen3 x4
  • Features1. High-performance NVMe SSD with read speeds up to 3100 MB/

Options Graphene Cooling-1TB

  • Reads up to 3600 MB/s for faster boot and load times with PCIe Gen3x4
  • Writes up to 2800 MB/s to move large files quickly using NVMe
  • 3D NAND QLC flash increases density and endurance for long-term storage
  • Graphene cooling vest and thermal pad lower drive temperature under heavy workloads
  • S.M.A.R.T., ECC, TRIM and PLP protect data integrity during unexpected power loss

1 TB PCIe Gen3 x4 NVMe drive

The Orico e3500-1TB is a 1 TB M.2 2280 internal SSD that uses 3D NAND QLC flash and a PCIe Gen3 x4 NVMe interface. Sequential reads reach up to 3500 MB/s and writes up to 2800 MB/s. A graphene cover and an included cooling vest with thermal pad help manage heat during sustained workloads.

Suits laptops and desktops with an M.2 NVMe slot

Builders upgrading from a SATA drive or adding fast primary storage to a compatible ultrabook, laptop or desktop will benefit from the speed jump. Systems limited to PCIe Gen3 or SATA interfaces cannot exploit the full throughput, and users who need sustained heavy write endurance may prefer a TLC or SLC alternative.

Drops into any M.2 2280 NVMe socket

The drive requires an M.2 2280 key-M slot wired for PCIe NVMe; the bundled cooling vest attaches directly to the controller for thermal relief. No separate heatsink purchase is needed, freeing budget and installation time. The package also includes a thermal conductive silicone pad and a user manual for setup guidance.

Istaknuto

  • Reads up to 3600 MB/s for faster boot and load times with PCIe Gen3x4
  • Writes up to 2800 MB/s to move large files quickly using NVMe
  • 3D NAND QLC flash increases density and endurance for long-term storage
  • Graphene cooling vest and thermal pad lower drive temperature under heavy workloads
  • S.M.A.R.T., ECC, TRIM and PLP protect data integrity during unexpected power loss

Specifikacije

BrandORICO
SeriesORICO J10
ModelORICO J10
Device TypeInternal Solid State Drive (SSD)
Form FactorM.2 2280
Capacity1TB
Memory Components3D NAND
InterfacePCIe NVMe Gen3 x4
Features1. High-performance NVMe SSD with read speeds up to 3100 MB/s and write speeds up to 1900 MB/s, utilizing PCIe Gen3 x4 technology.
2. Ensured reliability and stability through 96 hours of rigorous testing, including sleep tests, read/write tests, high-temperature tests, and performance tests.
3. Compatible with PS5, PCs, and laptops, featuring M.2 2280 form factor and S.M.A.R.T. function support for efficient operation.
4. Equipped with a pre-installed aluminum heatspreader to dissipate heat and prevent throttling, ensuring sustained high performance.
5. Backed by a 5-year limited wa
Package Content1 x ORICO NVMe SSD
1 x Cooling vest
1 x Thermal conductive silicone pad
1 x User manual

Druge verzije ovog modela

još 3 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Does my motherboard need an M.2 slot that supports PCIe NVMe Gen3 x4 for this 1 TB drive to work?

Yes, the drive uses the M.2 2280 form factor and a PCIe NVMe Gen3 x4 interface, so the host slot must provide that electrical connection.

Will this NVMe SSD run on an older platform that only has SATA M.2 slots?

No, SATA M.2 slots do not carry the PCIe lanes this NVMe drive requires; it will not be detected or function in a SATA-only slot.

How can I verify the drive is delivering its rated read performance of up to 3500 MB/s after installation?

Run a sequential-read benchmark such as CrystalDiskMark on the formatted volume and confirm the result approaches the 3500 MB/s specification.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.