Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Green rectangular DDR4 RDIMM module with black chips and gold edge contacts

OWC

OWC 2R9D42R816GB 16GB DDR4 2933MHz CL21 ECC RDIMM memory upgrade

SKU CH-7FTR-G5CFP

16GB DDR4 2933MHz ECC registered RDIMM for Supermicro X11 server motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 16GB

  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy multi-DIMM workloads
  • 16 GB capacity expands memory for virtualisation
  • 2933 MHz speed matches Supermicro X11 specifications
  • 2 V operation reduces power draw per module

Server ECC RDIMM for Supermicro X11

This OWC DDR4 module delivers 16 GB of registered ECC memory at 2933 MHz with CL21 latency. It is built for Supermicro motherboards X11SRi-IF, X11SRL-F, X11SRM-F and X11SRM-VF. The part replaces Supermicro MEMDR416LCL01ER29, MEMDR416LCL03ER29, MEM-DR416LD-ER29, MEMDR416LHL04ER29 and MEMDR416LHL05ER29. It suits administrators expanding capacity in compatible servers or workstations.

288-pin registered DIMM at 1.2 V

The stick uses a standard 288-pin DDR4 form factor without a heat spreader. Registered buffering and ECC provide the error correction and signal stability required by multi-socket server platforms. It operates at 1.2 V and is backward compatible with 2133 MHz, 2400 MHz and 2666 MHz bus speeds. Mixing with unbuffered memory is not supported.

Upgrade from lower-capacity or slower DDR4 RDIMMs

Installing this module adds 16 GB per slot and raises the memory clock to 2933 MHz where the platform allows. The jump is worthwhile when the workload needs more ECC-protected capacity or when replacing failed sticks with a validated alternative. It will not fit standard desktop boards that require unbuffered non-ECC memory.

Istaknuto

  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy multi-DIMM workloads
  • 16 GB capacity expands memory for virtualisation
  • 2933 MHz speed matches Supermicro X11 specifications
  • 2 V operation reduces power draw per module

Specifikacije

BrandOWC
Part Number2R9D42R816GB
Capacity16GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11SRi-IF
Supermicro Motherboard X11SRL-F
Supermicro Motherboard X11SRM-F
Supermicro Motherboard X11SRM-VF

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What DDR4 speed and CAS latency does this 16GB RDIMM run at?

The module is rated PC4-23400 at 2933MHz with CL21 timings and operates at 1.2V.

Does this 288-pin ECC RDIMM require a specific motherboard slot or form factor?

It fits standard 288-pin DDR4 DIMM slots on the listed Supermicro X11 server boards; no special bracket or cooling clearance is needed.

What is the correct way to install this registered ECC module and what mistake should I avoid?

Power down the server, open the chassis, align the notch with the slot key, press firmly until both retention clips click, and do not mix it with unbuffered DIMMs.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.