Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Two green DDR3 ECC registered DIMMs 240-pin 1.5V

OWC

OWC 32GB (2x16GB) DDR3 1333 ECC RDIMM 1R3D32R4032P memory upgrade

SKU CH-1NKZ-8Q0XC

32GB kit of two 16GB DDR3 1333 ECC registered DIMMs for Supermicro SuperServer 1026, 2026 and 6016 series

  • Capacity32GB (2 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in servers
  • 32GB kit (2×16GB) expands memory capacity for heavy workloads
  • DDR3 1333 CL9 matches qualified Supermicro SuperServer speeds
  • 5V 240-pin RDIMM fits listed 1026, 2026 and 6016 series
  • JEDEC and RoHS compliant modules tested for reliable operation

System-specific DDR3 ECC RDIMM

This 32 GB kit contains two 16 GB registered DIMMs built for Supermicro SuperServer 1026GT, 1026T, 1026TT, 2026TT and 6016GT platforms. It runs at DDR3 1333 (PC3-10600) with CL9 latency and 1.5 V operation. The modules use a 2Rx4 organisation and have no heat spreader.

Workstation and server upgrades only

Suits administrators extending the life of the listed Supermicro servers or building new nodes that require registered ECC memory. It will not work in standard desktop PCs, consumer NAS boxes or any system that takes unbuffered DIMMs, and it cannot be mixed with unbuffered modules.

Registered ECC requirement

The single specification that decides fit is the registered ECC DDR3 240-pin form factor; only systems designed for registered ECC RDIMMs at this speed and voltage will accept the kit.

Istaknuto

  • ECC registered design protects data integrity in servers
  • 32GB kit (2×16GB) expands memory capacity for heavy workloads
  • DDR3 1333 CL9 matches qualified Supermicro SuperServer speeds
  • 5V 240-pin RDIMM fits listed 1026, 2026 and 6016 series
  • JEDEC and RoHS compliant modules tested for reliable operation

Specifikacije

BrandOWC
Part Number1R3D32R4032P
Capacity32GB (2 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 1026GT Series
Supermicro SuperServer 1026T Series
Supermicro SuperServer 1026TT Series
Supermicro SuperServer 2026TT Series
Supermicro SuperServer 6016GT Series

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

Will the 1.5V DDR3 1333 RDIMM kit work alongside my existing DDR3 modules in the Supermicro 1026GT?

The kit uses 1.5V DDR3 1333 registered ECC with 2Rx4 organisation; it must not be mixed with unbuffered DIMMs and all slots should run at the same speed and voltage.

How can I confirm the 32GB kit is running at PC3-10600 CL9 after installation?

Check the BIOS memory information or run a tool such as dmidecode; it should report 1333 MT/s, CL9 timings, registered ECC and 2Rx4 rank for each 16GB module.

Does the 1R3D32R4032P package include anything besides the two 16GB RDIMMs?

The upgrade kit contains only the two 240-pin DDR3 1333 ECC registered DIMMs; no cables, brackets or additional hardware are supplied.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.