Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Four green DDR3 240-pin RDIMM modules in anti-static tray

OWC

OWC 32GB (4x8GB) DDR3 1333 ECC Registered RDIMM Kit for SuperBlade 7126T 7226T

SKU CH-M7GC-P39G4

32 GB DDR3 ECC registered kit of four 8 GB modules at 1333 MHz for Supermicro SuperBlade 7126T and 7226T servers

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 32GB (4 x 8GB)

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands SuperBlade capacity
  • DDR3 1333 CL9 matches Supermicro 7126T & 7226T specs
  • 5 V 240-pin RDIMM drops in without modification
  • Replaces six Supermicro part numbers for simple procurement

32GB DDR3 ECC RDIMM kit for SuperBlade

This 32GB kit contains four 8GB DDR3 1333 PC3-10600 CL9 registered DIMMs. It is built for Supermicro SuperBlade 7126T and 7226T series servers and workstations. The modules run at 1.5V and use a 240-pin form factor.

Registered ECC with 2Rx4 organisation

Each module is a 2Rx4 registered ECC DIMM, so the memory controller must support registered buffered operation. Mixing these with unbuffered DIMMs will prevent the system from posting. The CL9 latency and 1333MHz speed are fixed by the JEDEC PC3-10600 standard.

Suits blade-server upgrades and replacements

This kit fits administrators refreshing SuperBlade 7126T or 7226T chassis or replacing Supermicro part numbers MEMDR380LCL01ER13, MEMDR380LHL01ER13, MEMDR380LHL03ER13, MEMDR380LHV01ER13, MEMDR380LSL02ER13 or MEMDR380LSL06ER13. It will not work in standard desktop PCs, consumer laptops or any platform that requires unbuffered non-ECC memory.

Istaknuto

  • ECC registered design protects data integrity in servers
  • 32 GB kit (4 × 8 GB) expands SuperBlade capacity
  • DDR3 1333 CL9 matches Supermicro 7126T & 7226T specs
  • 5 V 240-pin RDIMM drops in without modification
  • Replaces six Supermicro part numbers for simple procurement

Specifikacije

BrandOWC
Part Number1R3D32R4032S
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 7126T Series
Supermicro SuperBlade 7226T Series

Druge verzije ovog modela

još 5 u istoj seriji

Ista obitelj, različita memorija, hladnjak ili frekvencija — usporedite prije kupnje.

Pitanja o ovom artiklu

What does 1333MHz CL9 mean for my SuperBlade server?

The modules run at DDR3 1333 with CL9 timing, giving the SuperBlade 7126T and 7226T series the rated speed and latency the platform expects.

What does PC3-10600 ECC Registered tell me about compatibility?

PC3-10600 is the DDR3 1333 standard; ECC Registered means these RDIMMs work only in servers and workstations that support registered memory, not in standard desktops.

Will the 240-pin 1.5V RDIMMs fit the SuperBlade memory slots?

Yes, each 8GB module is a 240-pin DDR3 RDIMM at 1.5V, matching the physical slot and voltage requirements of the SuperBlade 7126T and 7226T series.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.